K. Ashouri, M. Dousti, A novel approach in execution of transmission lines with focus on decreasing the total cost, in: 22nd International Power System Conference, [In Persian] Iran, Tehran, 2007.
 A.-A. Zekavati, A. Khodaverdian, M.-A. Jafari, A. Hosseini, Investigating performance of micropiled raft in foundation of power transmission line towers in cohesive soil: experimental and numerical study, Canadian Geotechnical Journal, 55(3) (2017) 312-328.
 E. Abraham, C.H. Chen, P.L. Hlapcich, D.E. Johnson, N.W. Jufer, N.G. Salisbury, H. Shaw, Micropile transmission foundation in environmentally sensitive, challenging terrain, Deep Foundation Institute,2010.
 H.J. Wang, Research on micropile foundation of transmission tower on soft soil area, in: fifth International Conference on Civil, Architectural and Hydraulic Engineering (ICCAHE), 2016, pp. 574-579.
 K.K. Phoon, J. Ching, Risk and reliability in geotechnical engineering, CRC Press, 2014.
 K.K. Phoon, J.V. Retief, Reliability of geotechnical structures in ISO2394, in, CRC Press, 2016, pp. Chap. 5.
 G.B. Baecher, J.T. Christian, Reliability and statistics in geotechnical engineering, John Wiley & Sons, 2005.
 J.M. Duncan, Factors of safety and reliability in geotechnical engineering, Journal of geotechnical and geoenvironmental engineering, 126(4) (2000) 307-316.
  T.M. Allen, Development of geotechnical resistance factors and downdrag load factors for LRFD foundation strength limit state design, in: US Department of Transportation, Federal Highway Administration, 2005.
 K.K. Phoon, Towards reliability-based design for geotechnical engineering, Special lecture for Korean Geotechnical Society, Seoul, 2004.
 Y.L. Zhao, W.G. An, Reliability-Based Stability Analysis of Foundation Pit Supported by Micro-Pile Composite Soil Nailing, in: Advanced Materials Research, Trans Tech Publ, 2011, pp. 2829-2833.
 Z. Luo, C.H. Juang, Efficient reliability-based design of drilled shafts in sand considering spatial variability, Journal of GeoEngineering, 7(2) (2012) 59-68.
 K. Phoon, J. Retief, J. Ching, M. Dithinde, T. Schweckendiek, Y. Wang, L. Zhang, Some observations on ISO2394: 2015 Annex D (Reliability of Geotechnical Structures) Structural Safety 62: 24-33 Crossref, Google Scholar, (2016).
 R. Jamshidi Chenari, R. Oloomi Dodaran, New method for estimation of the scale of fluctuation of geotechnical properties in natural deposits, Computational Methods in Civil Engineering, 1(1) (2010) 55-64.
 F. Nadim, Y.J. Choi, S. Lacasse, Calibration of partial safety factors for foundation design of offshore installations, in: Safety, Reliability, Risk and Life-Cycle Performance of Structures & Infrastructures, Taylor & Francis Group, London, 2013.
 J. Ching, K.-K. Phoon, Quantile value method versus design value method for calibration of reliability-based geotechnical codes, Structural Safety, 44 (2013) 47-58.
 K.K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Reliability-based design of foundations for transmission line structures, EPRI Research Report TR-105000, Cornell University 1995.
 K.-K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Reliability-based design for transmission line structure foundations, Computers and Geotechnics, 26(3) (2000) 169-185.
 K.K. Phoon, D.E. Becker, F.H. Kulhawy, Y. Honjo, N.K. Ovesen, S.R. Lo, Why consider reliability analysis for geotechnical limit state design, in: International Workshop on Limit State Design in Geotechnical Engineering Practice, 2003.
 K.-K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Development of a reliability-based design framework for transmission line structure foundations, Journal of Geotechnical and Geoenvironmental Engineering, 129(9) (2003) 798-806.
 K.-K. Phoon, F.H. Kulhawy, M.D. Grigoriu, Multiple resistance factor design for shallow transmission line structure foundations, Journal of Geotechnical and Geoenvironmental Engineering, 129(9) (2003) 807-818.
 F.H. Kulhawy, K.K. Phoon, Observations of geotechnical reliability-based design development in North America, in: Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design, IWS Kamakura, 2002, pp. 31-48.
 M.C. McVay, B. Birgisson, L. Zhang, A. Perez, S. Putcha, Load and resistance factor design (LRFD) for driven piles using dynamic methods—A Florida perspective, Geotechnical Testing Journal, 23(1) (2000) 55-66.
 S.G. Paikowsky, Load and resistance factor design (LRFD) for deep foundations, in: Foundation Design Codes and Soil Investigation in View of International Harmonization and Performance Based Design, IWS Kamakura, 2002, pp. 59-94.
 J. Zhang, L.-M. Zhang, W.H. Tang, Reliability based design of pile foundations considering both parameter and model uncertainties, Journal of GeoEngineering, 4(3) (2009) 119-127.
 K. Kwak, K.J. Kim, J. Huh, J.H. Lee, J.H. Park, Reliability-based calibration of resistance factors for static bearing capacity of driven steel pipe piles, Canadian Geotechnical Journal, 47(5) (2010) 528-538.
 H.-J. Kim, J.L. Mission, Probabilistic evaluation of economical factor of safety for the geotechnical design of pile axial load capacity, KSCE Journal of Civil Engineering, 15(7) (2011) 1167.
 D. Kim, M. Chung, K. Kwak, Resistance factor calculations for LRFD of axially loaded driven piles in sands, KSCE Journal of Civil Engineering, 15(7) (2011) 1185.
 J.H. Park, D. Kim, C.K. Chung, Implementation of Bayesian theory on LRFD of axially loaded driven piles, Computers and Geotechnics, 42 (2012) 73-80.
 J.H. Park, D. Kim, J.H. Lee, M. Chung, K. Kwak, LRFD implementation for static bearing capacity of driven piles, in: Safety, Reliability, Risk and Life-Cycle Performance of Structures & Infrastructures, Taylor & Francis Group, London, 2013.
 J. Jabo, Development of Reliability Based Design and Acceptance Protocol for Pile Foundations in Arkansas, GEO-RISK 2017, (2017) 277.
 F. Tonon, A. Mammino, Reliability-based design and construction issues for a micropile foundation in Costa Rica, Practice Periodical on Structural Design and Construction, 9(4) (2004) 227-236.
 A. Misra, L.A. Roberts, R. Oberoi, C.-H. Chen, Uncertainty analysis of micropile pullout based upon load test results, Journal of geotechnical and geoenvironmental engineering, 133(8) (2007) 1017-1025.
 FHWA, Micropile Design and Construction Guidelines, Federal Highway Administration, U.S Department of Transportation, U.S.A, 2005.
 C.J. Wong, Guidelines for Electrical Transmission Line Structural Loading, ASCE Task Committee on Structural Loading of the Committee on Electrical Transmission Structures, American Society of Civil Engineers, U.S.A, 2010.
 IEC, Design criteria of overhead transmission lines, in: CEI IEC 60826, CH-1211 Geneva 20, Switzerland, 2003.
 F. Paiva, J. Henriques, R.C. Barros, Review of Transmission Tower Testing Stations Around the World, Procedia Engineering, 57 (2013) 859-868.
 IEC, Loading tests on overhead line towers, in: CEI IEC 60652, CH-1211 Geneva 20, Switzerland, 2002.
 M.R. Ahmadi Golsefidi, F. Kalantari, Determination of bearing capacity and stiffness of micropiles using the loading tests results, in: 4th international Conference on Geotechnical Engineering and Soil Mechanics, [In Persian] Tehran, Iran, 2010.
 E. Ghannoum, Probabilistic design of transmission lines Part II: Design criteria corresponding to a target reliability, IEEE transactions on power apparatus and systems, (9) (1983) 3065-3079.
 A.W. Stuedlein, M.D. Gibson, G.E. Horvitz, Tension and compression micropile load tests in gravelly sand, in: 6th International Conference on case histories in Geotechnical engineering, VA, Arlington, 2008.
 J. Han, S.-L. Ye, A field study on the behavior of micropiles in clay under compression or tension, Canadian Geotechnical Journal, 43(1) (2006) 19-29.
 A.Y. Abd Elaziz, M.H. El Naggar, Geotechnical capacity of hollow-bar micropiles in cohesive soils, Canadian Geotechnical Journal, 51(10) (2014) 1123-1138.