Abbaslou, Hakime Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
Abbaslou, Hakime Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
Abedian, sahar Rock fall Susceptibility Mapping Using Artificial Neural Network, Frequency Ratio, and Logistic Regression: A Case Study in Central Iran, Taft County [Volume 4, Issue 1, 2020, Pages 63-80]
Afshar, Ali Evaluating the Effects of Countdown Timers on Intersection Safety: A Case Study in Arak, Iran [Volume 4, Issue 3, 2020, Pages 377-385]
Ahmadi Nezhad, AmirHossein Evaluating the Effects of Countdown Timers on Intersection Safety: A Case Study in Arak, Iran [Volume 4, Issue 3, 2020, Pages 377-385]
Akhaveissy, Amir houshang Constant-damage residual ratios of SDOF systems subjected to pulse type ground motions [Volume 4, Issue 2, 2020, Pages 145-154]
Akhaveissy, Amir houshang Assessment of Seismic Demands caused by 12 November 2017 Ezgeleh Earthquake (Mw=7.3) in Kermanshah [Volume 4, Issue 1, 2020, Pages 103-112]
Akhondi, Behzad Investigation on the Effect of Addition of Nano Alumina, Nano-silica, Nano Titania, and Mwcnts on Flexural and Compressive Strengths of Cement Mortar [Volume 4, Issue 4, 2020, Pages 487-504]
Akhoond-Ali, Ali Mohammad Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]
Alidoust, Pourya Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
Alinaghimaddah, Seyedreza Effect of distance from the sea on reinforced concrete chloride corrosion probability [Volume 4, Issue 2, 2020, Pages 199-208]
Almasi, Seyed Ahmad Rock fall Susceptibility Mapping Using Artificial Neural Network, Frequency Ratio, and Logistic Regression: A Case Study in Central Iran, Taft County [Volume 4, Issue 1, 2020, Pages 63-80]
Amintoosi, Mahmood Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
Asemi, Farhad The Effect of the Crack Initiation and Propagation on the P-Wave Velocity of Limestone and Plaster Subjected to Compressive Loading [Volume 4, Issue 1, 2020, Pages 55-62]
Asheghi Mehmandari, Tohid The Effect of the Crack Initiation and Propagation on the P-Wave Velocity of Limestone and Plaster Subjected to Compressive Loading [Volume 4, Issue 1, 2020, Pages 55-62]
Azarhoosh, Alireza Evaluation of Nano Hydrated Lime on the Moisture Susceptibility of Asphalt Mixtures Using Surface Free Energy [Volume 4, Issue 1, 2020, Pages 125-136]
Azarhoosh, Mohammad Javad Evaluation of Nano Hydrated Lime on the Moisture Susceptibility of Asphalt Mixtures Using Surface Free Energy [Volume 4, Issue 1, 2020, Pages 125-136]
Aziminezhad, Mehran Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
B
Bahaabadi, Mojtaba RajabiAnalysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
Bahadori, Hadi Investigating the Effect of Particle Size on the Anisotropic Behavior of Saturated Sands, Using Hollow Cylindrical Torsional Shear Apparatus [Volume 4, Issue 4, 2020, Pages 449-472]
Bahrpeymah, Abdolhamid Reliability and Sensitivity Analysis of Single-Layer Space Domes [Volume 4, Issue 3, 2020, Pages 367-376]
Bayat, H. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
Boroujerdian, Amin Mirza Investigating the influential factors in changing the likelihood of involving pedestrians in dangerous situations [Volume 4, Issue 3, 2020, Pages 357-366]
D
Daneshfaraz, Rasoul Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
Daneshfaraz, Rasoul The S-jump’s Characteristics in the Rough Sudden Expanding Stilling Basin [Volume 4, Issue 3, 2020, Pages 349-356]
Dasineh, Mehdi Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
E
Emaminejad, Newsha Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
Emrani, Nima Investigating the effect of road characteristics on fatal crash count and crash severity; Case study: Birjand-Qayen route [Volume 4, Issue 2, 2020, Pages 221-228]
Farhadi, Elham Seismic performance of bridges to a spatially varying horizontal and vertical earthquake ground motion [Volume 4, Issue 1, 2020, Pages 27-36]
Farhadi, Razieh Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
Farnood Ahmadi, P. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
G
Ganjkhanloo, Alireza Analysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
Ghaderi, Amir Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
Ghanbari, Bakhtiyar Constant-damage residual ratios of SDOF systems subjected to pulse type ground motions [Volume 4, Issue 2, 2020, Pages 145-154]
Ghanbari, Bakhtiyar Assessment of Seismic Demands caused by 12 November 2017 Ezgeleh Earthquake (Mw=7.3) in Kermanshah [Volume 4, Issue 1, 2020, Pages 103-112]
Ghanizadeh, Alireza Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
Ghanizadeh, Ali Reza Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
Ghanooni-Bagha, Mohammad Effect of distance from the sea on reinforced concrete chloride corrosion probability [Volume 4, Issue 2, 2020, Pages 199-208]
Ghasemi, Seyedeh Sima Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
Ghorbani, Masoud Ground Control Methods in High-Stress Ground Conditions in Civil and Mining Tunnels- Case Studies, and Benchmarking [Volume 4, Issue 4, 2020, Pages 557-578]
Gorjizade, Ali Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]
H
Hadavifar, Mojtaba Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
Hadavifar, Mojtaba Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
Hadifard, Hojat Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
Hajikarimi, Pouria Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
Hatami, Farzad Innovation Approach for Modelling Compressive Strength of Fiber Reinforced Concrete Using Gene Expression Programming [Volume 4, Issue 1, 2020, Pages 137-142]
Hojatkashani, Ata Investigation on the Effect of Addition of Nano Alumina, Nano-silica, Nano Titania, and Mwcnts on Flexural and Compressive Strengths of Cement Mortar [Volume 4, Issue 4, 2020, Pages 487-504]
Hosseini Nassab, Haddi Evaluation of Protective Cavities Position on Decreasing Destructive Effects of Surface Blast on Buried Tunnels [Volume 4, Issue 4, 2020, Pages 543-556]
J
Jafarzadeh, Firooz Finite difference method for buckling analysis of tapered Timoshenko beam made of functionally graded material [Volume 4, Issue 1, 2020, Pages 91-102]
Jahanbakhsh, Hamid Developing a Novel Machine Learning Method to Predict the Compressive Strength of Fly Ash Concrete in Different Ages [Volume 4, Issue 4, 2020, Pages 423-436]
Jalili-Ghazizadeh, Mohammadreza A Proposed Method for Locating of Leaky Areas in Water Supply Networks Based on Flow Hydraulic Grade Line [Volume 4, Issue 4, 2020, Pages 437-448]
K
Kanani, Saeed Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
Karimzad Anzabi, Azin Thermal effects on the mechanical properties of marble, travertine and concrete cores under direct tensile test [Volume 4, Issue 2, 2020, Pages 155-164]
Kazemi, Mohammad Sadegh Active control of structures based on an arbitrary damage index distribution [Volume 4, Issue 3, 2020, Pages 385-396]
Keramati, Abbas Effect of behavioral parameters of base isolators on the seismic response of the bridge to near-fault ground motions [Volume 4, Issue 3, 2020, Pages 277-288]
Khalili, Mohammad Thermal effects on the mechanical properties of marble, travertine and concrete cores under direct tensile test [Volume 4, Issue 2, 2020, Pages 155-164]
Khalilian, Shahrzad Innovation Approach for Modelling Compressive Strength of Fiber Reinforced Concrete Using Gene Expression Programming [Volume 4, Issue 1, 2020, Pages 137-142]
Kharazmi, Sara Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
Khoshand, Afshin Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
L
Layegh Rafat ‎, Mahmood Reliability and Sensitivity Analysis of Single-Layer Space Domes [Volume 4, Issue 3, 2020, Pages 367-376]
MajediAsl, Mehdi The S-jump’s Characteristics in the Rough Sudden Expanding Stilling Basin [Volume 4, Issue 3, 2020, Pages 349-356]
Maji, Arup Study of the Effect of Sensor Location on Sonic Echo/Impulse Response Testing in Timber Piles [Volume 4, Issue 4, 2020, Pages 473-486]
Mardi, Sahand Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
Mashmouli Juybari, Reza Evolutionary Polynomial Regression-Based Models for the One-Dimensional Compression of Chamkhaleh Sand Mixed with EPS and Tire Derived Aggregate [Volume 4, Issue 3, 2020, Pages 323-332]
Mirzaee, Reza The S-jump’s Characteristics in the Rough Sudden Expanding Stilling Basin [Volume 4, Issue 3, 2020, Pages 349-356]
Moasheri, Reza A Proposed Method for Locating of Leaky Areas in Water Supply Networks Based on Flow Hydraulic Grade Line [Volume 4, Issue 4, 2020, Pages 437-448]
Mobedi, Ehsan Effects of mechanical coupler on cyclic behavior of wet connection in precast concrete Frame [Volume 4, Issue 1, 2020, Pages 3-16]
Moeinaddini, Mazaher Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
Moghadas Nejad, Fereidoon Developing a Novel Machine Learning Method to Predict the Compressive Strength of Fly Ash Concrete in Different Ages [Volume 4, Issue 4, 2020, Pages 423-436]
Moghadas Nejad, Fereidoon Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
Mohammadi, Alireza Investigating the Effect of Particle Size on the Anisotropic Behavior of Saturated Sands, Using Hollow Cylindrical Torsional Shear Apparatus [Volume 4, Issue 4, 2020, Pages 449-472]
Mohammadi Golafshani, Emadaldin Innovation Approach for Modelling Compressive Strength of Fiber Reinforced Concrete Using Gene Expression Programming [Volume 4, Issue 1, 2020, Pages 137-142]
Mohammadnia, Esmail Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
Mohebi, Mohammad Masoud Stabilization of saturated silty sand by colloidal silica: compressive and cyclic strength and shear wave velocity [Volume 4, Issue 1, 2020, Pages 113-124]
Mokhtari, Maryam Rock fall Susceptibility Mapping Using Artificial Neural Network, Frequency Ratio, and Logistic Regression: A Case Study in Central Iran, Taft County [Volume 4, Issue 1, 2020, Pages 63-80]
Moridi, Ali Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]
Mortaheb, Mohammad Mehdi Success Breakdown Structure: Application to Petrochemical Projects Success Assessment [Volume 4, Issue 3, 2020, Pages 333-348]
Movahedifar, Seyyed Mojtaba Evaluation of Protective Cavities Position on Decreasing Destructive Effects of Surface Blast on Buried Tunnels [Volume 4, Issue 4, 2020, Pages 543-556]
N
Nabi Beidhendi, Gholamreza Evaluating the effect of truck size on the amount of Air pollutants emission due to consumption fuel [Volume 4, Issue 2, 2020, Pages 165-174]
Naghizade, A. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
Narmashiri, Kambiz Effects of Vertical Deficiency Location on the Structural Behavior of Steel SHS Short Columns [Volume 4, Issue 4, 2020, Pages 399-410]
Naseri, Hamed Developing a Novel Machine Learning Method to Predict the Compressive Strength of Fly Ash Concrete in Different Ages [Volume 4, Issue 4, 2020, Pages 423-436]
Ng, tang-tat Study of the Effect of Sensor Location on Sonic Echo/Impulse Response Testing in Timber Piles [Volume 4, Issue 4, 2020, Pages 473-486]
Nouri, Gholamreza Seismic performance of bridges to a spatially varying horizontal and vertical earthquake ground motion [Volume 4, Issue 1, 2020, Pages 27-36]
Nouri, Gholam Reza Effect of behavioral parameters of base isolators on the seismic response of the bridge to near-fault ground motions [Volume 4, Issue 3, 2020, Pages 277-288]
Nozari, Mohammad Amin Stabilization of saturated silty sand by colloidal silica: compressive and cyclic strength and shear wave velocity [Volume 4, Issue 1, 2020, Pages 113-124]
P
Parastesh, Hossein Effects of mechanical coupler on cyclic behavior of wet connection in precast concrete Frame [Volume 4, Issue 1, 2020, Pages 3-16]
R
Rahimi, Kian Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
Ramezanianpour, A.A. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
Ramezanianpour, A.M. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
Ramezanianpour, AmirMohammad Effect of Micro Silica and Slag on the Durability Properties of Mortars against Accelerated Carbonation and Chloride Ions Attack [Volume 4, Issue 4, 2020, Pages 411-422]
Rashidyan, Saman Study of the Effect of Sensor Location on Sonic Echo/Impulse Response Testing in Timber Piles [Volume 4, Issue 4, 2020, Pages 473-486]
Rassafi, Amir Abbas Investigating the effect of road characteristics on fatal crash count and crash severity; Case study: Birjand-Qayen route [Volume 4, Issue 2, 2020, Pages 221-228]
Rezaie Soufi, Ghazal Evolutionary Polynomial Regression-Based Models for the One-Dimensional Compression of Chamkhaleh Sand Mixed with EPS and Tire Derived Aggregate [Volume 4, Issue 3, 2020, Pages 323-332]
Rostami, Ghodsieh Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
S
Sadeghfam, Sina Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
Samadi, Bahram Dynamic Analysis of Suspension Footbridges under Human-induced Vibrations and Near-field Earthquakes–Soti Ghat Bridge in Nepal [Volume 4, Issue 4, 2020, Pages 505-516]
SatariFard, Ahmad Reza Experimental Study of Effects of Fly Ash On the Mechanical Properties of Hybrid Fiber Reinforced Cementitious Composite [Volume 4, Issue 2, 2020, Pages 185-198]
Sayyad, Amin Analysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
Shabakhty, Naser Reliability and Sensitivity Analysis of Single-Layer Space Domes [Volume 4, Issue 3, 2020, Pages 367-376]
Shabani Ammari, Amin Effects of Vertical Deficiency Location on the Structural Behavior of Steel SHS Short Columns [Volume 4, Issue 4, 2020, Pages 399-410]
Shafaati, Mostafa Investigating the influential factors in changing the likelihood of involving pedestrians in dangerous situations [Volume 4, Issue 3, 2020, Pages 357-366]
Shahbaz, Mohammad Thermal strength of the alkali-activated slag concrete [Volume 4, Issue 3, 2020, Pages 303-314]
Shahbazi, Ali Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]
Shahrouzi, Mohsen Seismic performance of bridges to a spatially varying horizontal and vertical earthquake ground motion [Volume 4, Issue 1, 2020, Pages 27-36]
Shariat Mohaymany, Afshin Analysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
Sharifzadeh, Mostafa Ground Control Methods in High-Stress Ground Conditions in Civil and Mining Tunnels- Case Studies, and Benchmarking [Volume 4, Issue 4, 2020, Pages 557-578]
Shayanfar, Mohsen Ali Effect of distance from the sea on reinforced concrete chloride corrosion probability [Volume 4, Issue 2, 2020, Pages 199-208]
Shourestani, Abolfazl REnergy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
T
Tavakoli Kashani, Ali Evaluating the Effects of Countdown Timers on Intersection Safety: A Case Study in Arak, Iran [Volume 4, Issue 3, 2020, Pages 377-385]
Tavana Amlashi, Amir Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
V
Veisi, Hojat Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
Y
Yaghoubi, Mohammad Mehdi Investigating the effect of road characteristics on fatal crash count and crash severity; Case study: Birjand-Qayen route [Volume 4, Issue 2, 2020, Pages 221-228]
Z
Zamani Ahari, Gholamreza Dynamic Analysis of Suspension Footbridges under Human-induced Vibrations and Near-field Earthquakes–Soti Ghat Bridge in Nepal [Volume 4, Issue 4, 2020, Pages 505-516]
Ziaie Moayed, Reza Stabilization of saturated silty sand by colloidal silica: compressive and cyclic strength and shear wave velocity [Volume 4, Issue 1, 2020, Pages 113-124]
