AUT Journal of Civil Engineering

Subjects = Soil Mechanics and Foundation

Number of Articles: 56

Reinforcement Effects on the Permanent Settlement of Sandy Slopes under Cyclic Loading

Volume 5, Issue 3, Summer 2021, Pages 389-402

10.22060/ajce.2021.18595.5686

Alireza Hajiani Bouhehrian

Estimating the Sand Shear Strength from Its Grain Characteristics Using an Artificial Neural Network Model and Multiple Regression Analysis

Volume 5, Issue 3, Summer 2021, Pages 403-420

10.22060/ajce.2021.19213.5721

Maryam Mousavi, Morteza Jiryaei Sharahi

Modified Dynamic Stress Concentration Factor for the Scattering of P-wave by Twin Tunnels

Volume 5, Issue 3, Summer 2021, Pages 433-448

10.22060/ajce.2022.19395.5729

Amir Rabiefar, Hamidreza Vosoughifar, Ali Nabizadeh, Hassan Negahdar

Two-Dimensional Geometrically Nonlinear Hyperelastic Wave Propagation Analysis in FG Thick Hollow Cylinders using MLPG Method

Volume 5, Issue 3, Summer 2021, Pages 465-480

10.22060/ajce.2021.19911.5752

Mohammad Hossein Ghadiri Rad, Farzad shahabian, Seyed Mahmoud Hosseini

Use of Taguchi Method to Evaluate the Hydraulic Conductivity of Lignocellulosic Fibers-Reinforced Soil

Volume 5, Issue 2, Spring 2021, Pages 213-224

10.22060/ajce.2020.18163.5660

Alireza Moslemi, Alireza Tabarsa, Seyed Yasin Mousavi, Mohamad Hadi Aryaie Monfared

Three-Dimensional Bearing Capacity Analysis of Rock Foundations Subjected to the Loads of Gravity Dams, Case Study: Shafaroud Dam

Volume 5, Issue 2, Spring 2021, Pages 257-268

10.22060/ajce.2020.18281.5671

Hazim AlKhafaji, Meysam Imani, ahmad fahimifar

Triaxial Determination of Shear Strength of Tire Chips-Sand-Geotextile Mixtures

Volume 5, Issue 1, Winter 2021, Pages 95-114

10.22060/ajce.2020.17637.5639

Javad Ghaffari

Improving Behavioral Properties of Dispersive Clay by Addition of Incinerated Sewage Sludge Ash and Hydrated Lime

Volume 5, Issue 1, Winter 2021, Pages 183-196

10.22060/ajce.2020.18077.5659

Hamid Shabanzadeh, Mohammadreza Atrchiyan

Investigating the Effect of Particle Size on the Anisotropic Behavior of Saturated Sands, Using Hollow Cylindrical Torsional Shear Apparatus

Volume 4, Issue 4, Autumn 2020, Pages 449-472

10.22060/ajce.2020.16390.5584

Alireza Mohammadi, Hadi Bahadori

Study of the Effect of Sensor Location on Sonic Echo/Impulse Response Testing in Timber Piles

Volume 4, Issue 4, Autumn 2020, Pages 473-486

10.22060/ajce.2020.16552.5590

Saman Rashidyan, tang-tat Ng, Arup Maji

Evaluation of Protective Cavities Position on Decreasing Destructive Effects of Surface Blast on Buried Tunnels

Volume 4, Issue 4, Autumn 2020, Pages 543-556

10.22060/ajce.2020.17101.5614

Haddi Hosseini Nassab, Seyyed Mojtaba Movahedifar

Ground Control Methods in High-Stress Ground Conditions in Civil and Mining Tunnels- Case Studies, and Benchmarking

Volume 4, Issue 4, Autumn 2020, Pages 557-578

10.22060/ajce.2019.17235.5623

Masoud Ghorbani, kourosh shahriar, Mostafa Sharifzadeh

The effect of grain size in rock-like materials on the strength and cracking process under uniaxial compressive stress

Volume 4, Issue 3, Summer 2020, Pages 267-276

10.22060/ajce.2019.16293.5579

iman yahya, ahmad fahimifar, yasaman ehteshami moein abadi

Evolutionary Polynomial Regression-Based Models for the One-Dimensional Compression of Chamkhaleh Sand Mixed with EPS and Tire Derived Aggregate

Volume 4, Issue 3, Summer 2020, Pages 323-332

10.22060/ajce.2019.16381.5583

mehran karimpour fard, Reza Mashmouli Juybari, Ghazal Rezaie Soufi

Thermal eﬀects on the mechanical properties of marble, travertine and concrete cores under direct tensile test

Volume 4, Issue 2, Spring 2020, Pages 155-164

10.22060/ajce.2019.14907.5509

Azin Karimzad Anzabi, ahmad fahimifar, Mohammad Khalili

Nanoclay Stabilization of Crude Oil Contaminated Soils

Volume 4, Issue 2, Spring 2020, Pages 175-184

10.22060/ajce.2019.15771.5550

hossein sadighi, mohammad ali roshan zamir

Biological stabilizers for different dispersive clayey soils

Volume 4, Issue 1, Winter 2020, Pages 17-26

10.22060/ajce.2019.15662.5546

Hakime Abbaslou, Hojat Hadifard, Alireza Ghanizadeh, Sara Kharazmi

Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries

Volume 4, Issue 1, Winter 2020, Pages 37-54

10.22060/ajce.2019.15026.5517

Amir Tavana Amlashi, Ali Reza Ghanizadeh, Hakime Abbaslou, Pourya Alidoust

The Effect of the Crack Initiation and Propagation on the P-Wave Velocity of Limestone and Plaster Subjected to Compressive Loading

Volume 4, Issue 1, Winter 2020, Pages 55-62

10.22060/ajce.2019.15984.5558

Tohid Asheghi Mehmandari, ahmad fahimifar, Farhad Asemi

Rock fall Susceptibility Mapping Using Artificial Neural Network, Frequency Ratio, and Logistic Regression: A Case Study in Central Iran, Taft County

Volume 4, Issue 1, Winter 2020, Pages 63-80

10.22060/ajce.2019.15368.5538

Maryam Mokhtari, sahar Abedian, Seyed Ahmad Almasi

Stabilization of saturated silty sand by colloidal silica: compressive and cyclic strength and shear wave velocity

Volume 4, Issue 1, Winter 2020, Pages 113-124

10.22060/ajce.2019.16165.5572

Mohammad Amin Nozari, Reza Ziaie Moayed, Mohammad Masoud Mohebi

Performance of Bucket Foundation Resting on Sand Subjected To Vertical Load

Volume 3, Issue 2, December 2019, Pages 139-148

10.22060/ajce.2018.14812.5498

Abdolhosein Haddad, Reza Amini

Determining Bearing Failure Modes of Jointed Rock Foundations Subjected to the Load of Strip Footings

Volume 3, Issue 2, December 2019, Pages 157-166

10.22060/ajce.2019.14836.5502

Meysam Imani, ahmad fahimifar

Artificial Neural Network and Optimization Algorithm to Improve Soil Resistance by Means of Aggregation Size Variation

Volume 3, Issue 2, December 2019, Pages 179-186

10.22060/ajce.2018.14988.5512

Ahmadreza Mazaheri, Farshid Jafarian

Calibration of Safety Factor for Micropile in Transmission Tower Foundations Based on Relative Reliability Approach

Volume 3, Issue 1, June 2019, Pages 61-74

10.22060/ajce.2018.15057.5519

M.A. Jafari, A.A. Zekavati

Journal Archive

Volume 10 (2026)

Volume 9 (2025)

Volume 8 (2024)

Volume 7 (2023)

Volume 6 (2022)

Volume 5 (2021)

Volume 4 (2020)

Volume 3 (2019)

Volume 2 (2018)

Volume 1 (2017)