Author Index

A

  • Abbas Gandomkar, Farhad Investigation Progressive Collapse of K-Model Steel Truss Bridge under Additional Live Load Following Bridge Repairs [Volume 6, Issue 2, 2022, Pages 191-204]
  • Abbasi, Mohammadhossein An Agent-Based Simulation for Destination Choice of Discretionary Tours: Evidence from Qazvin, Iran [Volume 6, Issue 1, 2022, Pages 51-62]
  • Abbasianjahromi, H. A Framework for Project Safety Management by Applying Social Network Analysis [Volume 1, Issue 2, 2017, Pages 111-120]
  • Abbasianjahromi, H. R. A Decision Support Model for Decision Making with the Use of 2-Tuple Linguistic Model in Subcontractor Selection [Volume 1, Issue 1, 2017, Pages 3-14]
  • Abbaslou, Hakime Analysis of Chloride Diffusivity in Green Concrete Based on Fick’s Second Law [Volume 3, Issue 2, 2019, Pages 167-178]
  • Abbaslou, Hakime Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
  • Abbaslou, Hakime Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
  • Abbaslou, Hanie Physicochemical characteristics of Sepiolite and Vermiculite clay soils as landfill clay liners [Volume 6, Issue 3, 2022, Pages 399-414]
  • Abdi Kordani, Ali Effect of Shoulder on Safety of Highways in Horizontal Curves Using Vehicle Dynamic Modeling Considering Yaw Rate [Volume 5, Issue 3, 2021, Pages 449-464]
  • Abdoli, Mohammad Three-Dimensional Numerical Study of the Tensile Capacity of Helical Multi-Plates Anchors [Volume 6, Issue 1, 2022, Pages 119-132]
  • Abedian, sahar Rock fall Susceptibility Mapping Using Artificial Neural Network, Frequency Ratio, and Logistic Regression: A Case Study in Central Iran, Taft County [Volume 4, Issue 1, 2020, Pages 63-80]
  • Abhari, S. Theoretical Assessment of the Behavior of a Cable Bracing System with a Central Steel Plate [Volume 3, Issue 1, 2019, Pages 37-48]
  • Aflaki, E. Using Empirical Correlations to Evaluate the Compression Index of Tehran Clay [Volume 3, Issue 1, 2019, Pages 129-136]
  • Afshar, Ali Evaluating the Effects of Countdown Timers on Intersection Safety: A Case Study in Arak, Iran [Volume 4, Issue 3, 2020, Pages 377-385]
  • Afzalifar, Najme Mechanical Properties of Concrete Containing Polyethylene Terephthalate, Rubber and Glass Wastes [Volume 6, Issue 3, 2022, Pages 387-398]
  • Aghajani Delavar, Mohammad. Prediction of Local Seismic Damage in Jacket-type Offshore Platforms [Volume 2, Issue 2, 2018, Pages 241-250]
  • Ahmadi, F. Impact of 30 Years Changing of River Flow on Urmia Lake Basin [Volume 2, Issue 1, 2018, Pages 115-122]
  • Ahmadi, M. M. Effect of Bentonite fine Content on the Triaxial Shear Behavior of Sandy Soils [Volume 2, Issue 2, 2018, Pages 177-182]
  • Ahmadi Nezhad, AmirHossein Evaluating the Effects of Countdown Timers on Intersection Safety: A Case Study in Arak, Iran [Volume 4, Issue 3, 2020, Pages 377-385]
  • Akbarimehr, D. Using Empirical Correlations to Evaluate the Compression Index of Tehran Clay [Volume 3, Issue 1, 2019, Pages 129-136]
  • Akbarpour, S. Compressive Toughness of Lightweight Aggregate Concrete Containing Different Types of Steel Fiber under Monotonic Loading [Volume 1, Issue 1, 2017, Pages 15-22]
  • Akhaveissy, Amir houshang Constant-damage residual ratios of SDOF systems subjected to pulse type ground motions [Volume 4, Issue 2, 2020, Pages 145-154]
  • Akhaveissy, Amir houshang Assessment of Seismic Demands caused by 12 November 2017 Ezgeleh Earthquake (Mw=7.3) in Kermanshah [Volume 4, Issue 1, 2020, Pages 103-112]
  • Akhondi, Behzad Investigation on the Effect of Addition of Nano Alumina, Nano-silica, Nano Titania, and Mwcnts on Flexural and Compressive Strengths of Cement Mortar [Volume 4, Issue 4, 2020, Pages 487-504]
  • Akhoond-Ali, Ali Mohammad Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]
  • Akrami, Vahid Seismic Evaluation of Coupled Shear Walls with Divided Coupling Beams [Volume 5, Issue 2, 2021, Pages 325-338]
  • Alidoust, Pourya Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
  • Alinaghimaddah, Seyedreza Effect of distance from the sea on reinforced concrete chloride corrosion probability [Volume 4, Issue 2, 2020, Pages 199-208]
  • AlKhafaji, Hazim Three-Dimensional Bearing Capacity Analysis of Rock Foundations Subjected to the Loads of Gravity Dams, Case Study: Shafaroud Dam [Volume 5, Issue 2, 2021, Pages 257-268]
  • Allafeepour, Amirhosein Analysis of Competition between Maritime and Multimodal Land-Sea Shipping in an International Freight Transportation Market [Volume 6, Issue 1, 2022, Pages 83-104]
  • Almasi, Seyed Ahmad Rock fall Susceptibility Mapping Using Artificial Neural Network, Frequency Ratio, and Logistic Regression: A Case Study in Central Iran, Taft County [Volume 4, Issue 1, 2020, Pages 63-80]
  • Amani, Mohammad Javad Traffic Lane Change Detection using smartphone sensors and GPS [Volume 7, Issue 1, 2023, Pages 13-30]
  • AMAR, KAHIL Numerical Simulation of the Effect of Column Removal on the Plastic Rotation of Beams in Reinforced Concrete Structures [Volume 5, Issue 4, 2021, Pages 657-674]
  • Amini, Reza Performance of Bucket Foundation Resting on Sand Subjected To Vertical Load [Volume 3, Issue 2, 2019, Pages 139-148]
  • Amintoosi, Mahmood Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
  • Amirabadizadeh, Mehdi Assessment of Data-driven Models in Downscaling of the Daily Temperature in Birjand Synoptic Station [Volume 3, Issue 2, 2019, Pages 193-200]
  • Amirchoupani, Pouya Optimization of Tunnel Reinforcements by Genetic Algorithm with the Aim of Replacing with Fibers [Volume 6, Issue 1, 2022, Pages 35-50]
  • Amirifar, Saeideh A Data Mining Framework to Identify Important Factors of Fatigue and Drowsiness Accidents [Volume 5, Issue 3, 2021, Pages 421-432]
  • Amoorezaei, K. Compressive Toughness of Lightweight Aggregate Concrete Containing Different Types of Steel Fiber under Monotonic Loading [Volume 1, Issue 1, 2017, Pages 15-22]
  • Amoorezaei, Kasra Stress-Strain Relationship for Nanosilica-Incorporated Lightweight Aggregate Concrete under Compressive Monotonic and Cyclic Loading [Volume 5, Issue 1, 2021, Pages 145-160]
  • Ansari, Bahman Half-Plane Boundary Element Fundamental Solutions and Body Force [Volume 5, Issue 4, 2021, Pages 625-642]
  • Arabani, Mahyar Evaluating the Effect of Liquid Antistrip Additives on Moisture Sensitivity of Glassphalt [Volume 5, Issue 3, 2021, Pages 507-520]
  • Ardeshir, Abdollah Optimal Planning of Pavement Maintenance and Rehabilitation Considering Pavement Deterioration Uncertainty [Volume 5, Issue 3, 2021, Pages 481-494]
  • Ardestani, Zahra Alsadat Competence and affective commitment as mediators of the effect of job characteristics on the performance of Iranian supervising engineers– supervising engineers’ perspective [Volume 6, Issue 4, 2022, Pages 493-508]
  • Arman, S. A Shear-based Adaptive Pushover Procedure for Moment-resisting Frames [Volume 2, Issue 2, 2018, Pages 183-194]
  • Arshadi, H. An Overview of the Effects of High-Strength Reinforcement (HSR) on the Intermediate Moment-Resisting Frames [Volume 1, Issue 2, 2017, Pages 177-188]
  • Aryaie Monfared, Mohamad Hadi Use of Taguchi Method to Evaluate the Hydraulic Conductivity of Lignocellulosic Fibers-Reinforced Soil [Volume 5, Issue 2, 2021, Pages 213-224]
  • Asakereh, A. Analysis of Local Site Effects on Seismic Ground Response under Various Earthquakes [Volume 2, Issue 2, 2018, Pages 227-240]
  • Asemi, Farhad The Effect of the Crack Initiation and Propagation on the P-Wave Velocity of Limestone and Plaster Subjected to Compressive Loading [Volume 4, Issue 1, 2020, Pages 55-62]
  • Asgari, Ali Extended power series solution for Perkins-Kern-Nordgren model of hydraulic fracture [Volume 6, Issue 4, 2022, Pages 461-468]
  • Ashayeri, I. Probabilistic Seismic Hazard Assessment and Geotechnical Seismic Micro-zonation of Kangavar with Ambient Vibration and Electrical Resistivity Analysis [Volume 2, Issue 1, 2018, Pages 29-38]
  • Ashayeri, I. Evaluation of Seismic Vulnerability of Masonry Buildings without Ties Using the RISK-UE Method, Case Study of Kermanshah City [Volume 2, Issue 2, 2018, Pages 143-152]
  • Asheghi Mehmandari, Tohid The Effect of the Crack Initiation and Propagation on the P-Wave Velocity of Limestone and Plaster Subjected to Compressive Loading [Volume 4, Issue 1, 2020, Pages 55-62]
  • Ashtari, Payam PSOHHO Hybrid Optimization Algorithm for Truss Optimization [Volume 6, Issue 2, 2022, Pages 295-318]
  • Aslanzadeh, Majid Effect of Shoulder on Safety of Highways in Horizontal Curves Using Vehicle Dynamic Modeling Considering Yaw Rate [Volume 5, Issue 3, 2021, Pages 449-464]
  • Atrchiyan, Mohammadreza Improving Behavioral Properties of Dispersive Clay by Addition of Incinerated Sewage Sludge Ash and Hydrated Lime [Volume 5, Issue 1, 2021, Pages 183-196]
  • Azadvar, M. Structural Damage Control with Interval Type-2 Fuzzy Logic Controller [Volume 2, Issue 2, 2018, Pages 125-134]
  • Azarhoosh, Alireza Investigation of the Rheological Behavior and Properties of Modified Asphalt Binder with Nano Hydrated Lime [Volume 3, Issue 2, 2019, Pages 187-192]
  • Azarhoosh, Alireza Evaluation of Nano Hydrated Lime on the Moisture Susceptibility of Asphalt Mixtures Using Surface Free Energy [Volume 4, Issue 1, 2020, Pages 125-136]
  • Azarhoosh, Alireza Modeling Marshall Test Results of Hot Mix Asphalt Using Nonlinear Genetic Programming Techniques [Volume 5, Issue 1, 2021, Pages 171-182]
  • Azarhoosh, Alireza Investigation of the Moisture Susceptibility of Nanocomposite-Modified Asphalt Mixture Using Surface Free Energy Theory [Volume 5, Issue 2, 2021, Pages 287-300]
  • Azarhoosh, Mohammad Javad Evaluation of Nano Hydrated Lime on the Moisture Susceptibility of Asphalt Mixtures Using Surface Free Energy [Volume 4, Issue 1, 2020, Pages 125-136]
  • Azarnia, Ashkan Physio-mechanical evaluation of Nano-soil as an additive to the sand-bentonite mixture for Tabriz city landfill liner [Volume 6, Issue 3, 2022, Pages 359-368]
  • Azhari, Mojtaba Buckling Analysis of Functionally Graded Plates Based on Two-Variable Refined Plate Theory Using the Bubble Finite Strip Method [Volume 1, Issue 2, 2017, Pages 145-152]
  • Aziminezhad, Mehran Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
  • Azizi, Mahdi Design Optimization of Truss Structures by Crystal Structure Algorithm [Volume 6, Issue 2, 2022, Pages 205-220]
  • Azizi, Mahdi BIM-based resource trade-off in dam project scheduling using Atomic Orbital Search (AOS) algorithm [Volume 6, Issue 4, 2022, Pages 469-492]
  • Azizian, Gh. Reliability Assessment of CFRP-Strengthened Deficient Steel SHS Columns [Volume 3, Issue 1, 2019, Pages 23-36]
  • Azizpour, M. A. Validation of Smartphone-Based Pavement Roughness Measures [Volume 1, Issue 2, 2017, Pages 135-144]

B

  • Babamoradi, Kourosh Stress-Strain Relationship for Nanosilica-Incorporated Lightweight Aggregate Concrete under Compressive Monotonic and Cyclic Loading [Volume 5, Issue 1, 2021, Pages 145-160]
  • Babamuradi, K. Compressive Toughness of Lightweight Aggregate Concrete Containing Different Types of Steel Fiber under Monotonic Loading [Volume 1, Issue 1, 2017, Pages 15-22]
  • Baghalzadeh Shishehgarkhaneh, Milad Toward Nearly Zero Energy Building Designs: A Comparative Study of Various Techniques [Volume 5, Issue 2, 2021, Pages 339-356]
  • Baghalzadeh Shishehgarkhaneh, Milad Design Optimization of Truss Structures by Crystal Structure Algorithm [Volume 6, Issue 2, 2022, Pages 205-220]
  • Baghalzadeh Shishehgarkhaneh, Milad BIM-based resource trade-off in dam project scheduling using Atomic Orbital Search (AOS) algorithm [Volume 6, Issue 4, 2022, Pages 469-492]
  • Bagheri, M. The Effect of Bio-Deposition on Mechanical Performance of Cement-Based Materials [Volume 1, Issue 1, 2017, Pages 61-66]
  • Bagheri, Q. SWOT Analysis on Marine Transport Companies of Iran: a Case Study [Volume 2, Issue 2, 2018, Pages 153-160]
  • Bahaabadi, Mojtaba Rajabi Analysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
  • Bahadori, Hadi Investigating the Effect of Particle Size on the Anisotropic Behavior of Saturated Sands, Using Hollow Cylindrical Torsional Shear Apparatus [Volume 4, Issue 4, 2020, Pages 449-472]
  • Bahman-Zadeh, Farnaz Effect of using Calcined Clays, Silica Fume, and Limestone Powder on the Compressive Strength and Chloride Binding Capacity of Cementitious Pastes [Volume 5, Issue 4, 2021, Pages 675-684]
  • Bahrpeymah, Abdolhamid Reliability and Sensitivity Analysis of Single-Layer Space Domes [Volume 4, Issue 3, 2020, Pages 367-376]
  • Bahrpeymah, Abdolhamid Reliability of Single-Layer Steel Space Domes under the Effects of the Changes in the Height-to-Span Ratio [Volume 6, Issue 1, 2022, Pages 3-14]
  • Bakhshi, N. Chromate Ion Transfer Through Mortar by Accelerated Migration Method [Volume 3, Issue 1, 2019, Pages 3-12]
  • Balanian, Mohsen A Robust Optimization Model for Improving Reliability of Tuned Mass Damper [Volume 1, Issue 2, 2017, Pages 121-128]
  • Balapour, M. Effect of Nano Rice Husk Ash Against Penetration of Chloride Ions in Mortars [Volume 2, Issue 1, 2018, Pages 97-102]
  • Banar, Rasoul Evaluation of Sustainability Performance of Cementitious Mortars Containing Silica Fume [Volume 6, Issue 2, 2022, Pages 175-190]
  • Banimahd, Seyed Amir A Two-Stage Procedure for Optimum Design of Plate Girders Using a Meta-heuristic Algorithm [Volume 6, Issue 4, 2022, Pages 435-446]
  • Bararnia, S. Effect of Rotational Components of Strong Ground Motions on the Response of Cooling Towers Based on Dense Array Data (A Case Study: Kazeron Cooling Tower) [Volume 1, Issue 1, 2017, Pages 87-92]
  • Barghian, M. Theoretical Assessment of the Behavior of a Cable Bracing System with a Central Steel Plate [Volume 3, Issue 1, 2019, Pages 37-48]
  • Barghian, Majid Improvement of Dynamic Behavior of Suspension Footbridges by Modification on Hangers' System Arrangement [Volume 5, Issue 1, 2021, Pages 129-144]
  • Bargi, K. Prediction of Local Seismic Damage in Jacket-type Offshore Platforms [Volume 2, Issue 2, 2018, Pages 241-250]
  • Barkhordari, Houshang Response Surface Methodology Modelling to Study the Influence of Recycled Aggregates on Some Mechanical Properties of Recycled Concrete [Volume 5, Issue 2, 2021, Pages 301-310]
  • Basiri, Mahla Design Optimization of Truss Structures by Crystal Structure Algorithm [Volume 6, Issue 2, 2022, Pages 205-220]
  • Bayat, H. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
  • Behfarnia, K. The Effect of Alkaline Activator on Workability and Compressive Strength of Alkali-Activated Slag Concrete [Volume 1, Issue 1, 2017, Pages 55-60]
  • Behnamfar, F. Modal Non-linear Static Analysis of Structures Based on Story Shears [Volume 3, Issue 1, 2019, Pages 119-128]
  • Behnamfar, F. A Shear-based Adaptive Pushover Procedure for Moment-resisting Frames [Volume 2, Issue 2, 2018, Pages 183-194]
  • Behrooz Sarand, Fariba Physio-mechanical evaluation of Nano-soil as an additive to the sand-bentonite mixture for Tabriz city landfill liner [Volume 6, Issue 3, 2022, Pages 359-368]
  • Behrouz Sarand, Fariba A finite element modeling of drained triaxial test on loose sand using different constitutive models [Volume 6, Issue 3, 2022, Pages 339-358]
  • Beigi, Hassan Success Breakdown Structure: Application to Petrochemical Projects Success Assessment [Volume 4, Issue 3, 2020, Pages 333-348]
  • Biglari, M. Probabilistic Seismic Hazard Assessment and Geotechnical Seismic Micro-zonation of Kangavar with Ambient Vibration and Electrical Resistivity Analysis [Volume 2, Issue 1, 2018, Pages 29-38]
  • Biglarijoo, Name Response Surface Methodology Modelling to Study the Influence of Recycled Aggregates on Some Mechanical Properties of Recycled Concrete [Volume 5, Issue 2, 2021, Pages 301-310]
  • Binaipur, F. An Overview of the Effects of High-Strength Reinforcement (HSR) on the Intermediate Moment-Resisting Frames [Volume 1, Issue 2, 2017, Pages 177-188]
  • Bokaeian, V. The Effect of Bio-Deposition on Mechanical Performance of Cement-Based Materials [Volume 1, Issue 1, 2017, Pages 61-66]
  • Bordbar, Ali Competence and affective commitment as mediators of the effect of job characteristics on the performance of Iranian supervising engineers– supervising engineers’ perspective [Volume 6, Issue 4, 2022, Pages 493-508]
  • Boroujerdian, Amin Mirza Investigating the influential factors in changing the likelihood of involving pedestrians in dangerous situations [Volume 4, Issue 3, 2020, Pages 357-366]

C

  • Chamani FoomaniDana, Amir A Game-Theoretic Approach for Transportation of Oil Products in a Duopolistic Supply Chain [Volume 5, Issue 1, 2021, Pages 115-128]

D

  • Dabbagh, H. Compressive Toughness of Lightweight Aggregate Concrete Containing Different Types of Steel Fiber under Monotonic Loading [Volume 1, Issue 1, 2017, Pages 15-22]
  • Dabiri, Rouzbeh A finite element modeling of drained triaxial test on loose sand using different constitutive models [Volume 6, Issue 3, 2022, Pages 339-358]
  • Dabirinejad, Shahab Investigating the Relationship between Motorcyclists’ Lifestyle, Riding Behavior, and At-Fault Crashes [Volume 6, Issue 1, 2022, Pages 133-142]
  • Dadashi, Mostafa Simulation of evacuation in an educational building using Agent-Based Modeling with emphasis on furnishing location [Volume 7, Issue 1, 2023, Pages 83-90]
  • Daei, M. Optimal Stiffeners Spacing for Intermediate Link in Eccentrically Braced Frame to Increase Energy Dissipation [Volume 1, Issue 1, 2017, Pages 39-44]
  • Daei, Maryam A Robust Optimization Model for Improving Reliability of Tuned Mass Damper [Volume 1, Issue 2, 2017, Pages 121-128]
  • Daneshfaraz, Rasoul Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
  • Daneshfaraz, Rasoul The S-jump’s Characteristics in the Rough Sudden Expanding Stilling Basin [Volume 4, Issue 3, 2020, Pages 349-356]
  • Daneshfaraz, Rasoul Hydraulic Jump in a Rough Sudden Symmetric Expansion Channel [Volume 5, Issue 2, 2021, Pages 245-256]
  • Daqiqnia, Amir Hussein Toward Nearly Zero Energy Building Designs: A Comparative Study of Various Techniques [Volume 5, Issue 2, 2021, Pages 339-356]
  • Dariane, Alireza Borhani An EvolutionaryAlgorithm for Deriving Optimal Operating Policy Under Uncertainties for Tehran Multi-reservoir System [Volume 3, Issue 2, 2019, Pages 213-224]
  • Dashti, Pooria Evaluation of Sustainability Performance of Cementitious Mortars Containing Silica Fume [Volume 6, Issue 2, 2022, Pages 175-190]
  • Dasineh, Mehdi Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
  • Deheshti, Ahmadreza Feasibility of construction of buildings with the 3D printing concrete from different methods perspectives focusing on economic evaluation [Volume 7, Issue 1, 2023, Pages 3-12]
  • Dehshiri Parizi, M. H. The Evaluation of Friction Demand Factor in Loop Ramps of Interchange Facilities [Volume 2, Issue 2, 2018, Pages 195-208]
  • Dehvari, Abdol Ghaium Probabilistic Optimum Percentage of Recycled Aggregates Contaminated with Chloride Ion in Concrete Mix [Volume 5, Issue 3, 2021, Pages 521-540]
  • Delnavaz, Ehsan Analysis of Chloride Diffusivity in Green Concrete Based on Fick’s Second Law [Volume 3, Issue 2, 2019, Pages 167-178]

E

  • Ebrahimi Asl, Saeideh Physio-mechanical evaluation of Nano-soil as an additive to the sand-bentonite mixture for Tabriz city landfill liner [Volume 6, Issue 3, 2022, Pages 359-368]
  • Ebrahimzadeh, Shahrad Numerical Evaluation of Unreinforced Masonry Brick Walls Retrofitted by Polypropylene Straps Subjected to Lateral Loading [Volume 6, Issue 4, 2022, Pages 447-460]
  • Emami, Fereshteh Seismic Performance Assessment of a Masonry Arch Bridge Using Finite Element Method and Retrofitting by FRP [Volume 6, Issue 1, 2022, Pages 63-82]
  • Emaminejad, Newsha Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
  • Emrani, Nima Investigating the effect of road characteristics on fatal crash count and crash severity; Case study: Birjand-Qayen route [Volume 4, Issue 2, 2020, Pages 221-228]
  • Erfanian, Ali Effect of Load Eccentricity on the Bearing Capacity of Strip Footings on Rock Masses [Volume 6, Issue 3, 2022, Pages 415-432]
  • Esfahani, M. Reza The Effect of GGBFS with Steel and Carbon Fibers on the Mechanical Properties and Durability of Concrete [Volume 6, Issue 2, 2022, Pages 319-336]
  • Esfahanir, M. Reza Exterior Concrete Beam-column Connection Reinforced with Glass Fiber Reinforced Polymers (GFRP) bars under Cyclic Loading [Volume 2, Issue 2, 2018, Pages 161-176]
  • Eskandari, Rasoul Proposing Formula-Based Design Method for RC Columns and Uniformly Reinforced Shear Walls [Volume 4, Issue 2, 2020, Pages 249-264]
  • Eskandari, Rasoul Direct Design Method for RC Columns and Uniformly Reinforced Shear Walls based on Canadian Standards [Volume 6, Issue 2, 2022, Pages 159-174]
  • Eslamian, S. Meteorological Drought Monitoring Using the Multivariate Index of SPEI (Case Study: Karun Basin) [Volume 3, Issue 1, 2019, Pages 85-92]
  • Esmaeeli, M. R. Mechanical Properties of Open Graded Asphalt Mixtures with Pumice Aggregate [Volume 1, Issue 2, 2017, Pages 189-194]
  • Esmaeili, N. Investigating of the Effects of Nano-materials on the Moisture Susceptibility of Asphalt Mixtures Containing Glass Cullets [Volume 3, Issue 1, 2019, Pages 107-118]
  • Etemadi, A. A Framework for Project Safety Management by Applying Social Network Analysis [Volume 1, Issue 2, 2017, Pages 111-120]

F

  • Faghih Khorasani, Fatemeh A mathematical model for predicting complete compressive stress-strain curve of plain and short fiber reinforced clay adobes [Volume 5, Issue 1, 2021, Pages 37-68]
  • Fahimifar, A. An Experimental and Numerical Study on the Effect of Loading Type and Specimen Geometry on Mode-I Fracture Toughness of Rock [Volume 1, Issue 1, 2017, Pages 45-54]
  • Fallah, Afshin Effect of Shoulder on Safety of Highways in Horizontal Curves Using Vehicle Dynamic Modeling Considering Yaw Rate [Volume 5, Issue 3, 2021, Pages 449-464]
  • Farahani, B. Effects of Silica Fume and Nano-silica on the Engineering Properties of Kaolinite Clay [Volume 2, Issue 2, 2018, Pages 135-142]
  • Fardmoradinia, Sina BIM-based resource trade-off in dam project scheduling using Atomic Orbital Search (AOS) algorithm [Volume 6, Issue 4, 2022, Pages 469-492]
  • Fard Moradinia, Sina Toward Nearly Zero Energy Building Designs: A Comparative Study of Various Techniques [Volume 5, Issue 2, 2021, Pages 339-356]
  • Faresghoshooni, Anvar Lateral Stiffness and Bending Moment Changes along Piles Having Different Sections in Loose Sand Subjected to Cyclic Lateral Loading [Volume 5, Issue 4, 2021, Pages 643-656]
  • Farhadi, Elham Seismic performance of bridges to a spatially varying horizontal and vertical earthquake ground motion [Volume 4, Issue 1, 2020, Pages 27-36]
  • Farhadi, Razieh Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
  • Farnood Ahmadi, P. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
  • FAROUDJA, MEZIANI Numerical Simulation of the Effect of Column Removal on the Plastic Rotation of Beams in Reinforced Concrete Structures [Volume 5, Issue 4, 2021, Pages 657-674]
  • Farzin, Iman The Assessment of the Change in the Share of Public Transportation by Applying Transportation Demand Management Policies [Volume 5, Issue 2, 2021, Pages 199-212]
  • Farzin, Iman An Agent-Based Simulation for Destination Choice of Discretionary Tours: Evidence from Qazvin, Iran [Volume 6, Issue 1, 2022, Pages 51-62]
  • Fathi, A. Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) Contamination in Surface Soil along Tehran-Semnan Road, Iran [Volume 1, Issue 1, 2017, Pages 77-86]
  • Firoozfar, Alireza Half-Plane Boundary Element Fundamental Solutions and Body Force [Volume 5, Issue 4, 2021, Pages 625-642]
  • Firoozi Yeganeh, S. Validation of Smartphone-Based Pavement Roughness Measures [Volume 1, Issue 2, 2017, Pages 135-144]

G

  • Ganjkhanloo, Alireza Analysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
  • Ghaderi, Amir Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
  • Ghadiri Rad, M.H. A Geometrically Non-linear Stochastic Analysis of Two-dimensional Structures made of Neo-hookean Hyperelastic Materials Uusing MLPG Method: Considering Uncertainty in Mechanical Properties [Volume 2, Issue 2, 2018, Pages 209-218]
  • Ghadiri Rad, Mohammad Hossein Two-Dimensional Geometrically Nonlinear Hyperelastic Wave Propagation Analysis in FG Thick Hollow Cylinders using MLPG Method [Volume 5, Issue 3, 2021, Pages 465-480]
  • Ghafarian, Danial Numerical Study of the Settlement of Rafts on Soft Soils Improved by Small Groups of Stone Columns [Volume 5, Issue 4, 2021, Pages 577-596]
  • Ghaffari, Javad Triaxial Determination of Shear Strength of Tire Chips-Sand-Geotextile Mixtures [Volume 5, Issue 1, 2021, Pages 95-114]
  • Ghanbari, Bakhtiyar Constant-damage residual ratios of SDOF systems subjected to pulse type ground motions [Volume 4, Issue 2, 2020, Pages 145-154]
  • Ghanbari, Bakhtiyar Assessment of Seismic Demands caused by 12 November 2017 Ezgeleh Earthquake (Mw=7.3) in Kermanshah [Volume 4, Issue 1, 2020, Pages 103-112]
  • Ghanizadeh, Alireza Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
  • Ghanizadeh, Ali Reza Analysis of Chloride Diffusivity in Green Concrete Based on Fick’s Second Law [Volume 3, Issue 2, 2019, Pages 167-178]
  • Ghanizadeh, Ali Reza Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
  • Ghanizadeh, Ali Reza Physicochemical characteristics of Sepiolite and Vermiculite clay soils as landfill clay liners [Volume 6, Issue 3, 2022, Pages 399-414]
  • Ghanooni-Bagha, Mohammad Effect of distance from the sea on reinforced concrete chloride corrosion probability [Volume 4, Issue 2, 2020, Pages 199-208]
  • Ghasemi, Masoud Traffic Lane Change Detection using smartphone sensors and GPS [Volume 7, Issue 1, 2023, Pages 13-30]
  • Ghasemi, Seyedeh Sima Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
  • Ghavami, Khosrow A mathematical model for predicting complete compressive stress-strain curve of plain and short fiber reinforced clay adobes [Volume 5, Issue 1, 2021, Pages 37-68]
  • Ghavami, S. Effects of Silica Fume and Nano-silica on the Engineering Properties of Kaolinite Clay [Volume 2, Issue 2, 2018, Pages 135-142]
  • Ghorbani, Masoud Ground Control Methods in High-Stress Ground Conditions in Civil and Mining Tunnels- Case Studies, and Benchmarking [Volume 4, Issue 4, 2020, Pages 557-578]
  • GivKashi, Mohammad Rasul Feasibility of construction of buildings with the 3D printing concrete from different methods perspectives focusing on economic evaluation [Volume 7, Issue 1, 2023, Pages 3-12]
  • GivKashi, Mohammad Rasul Simulation of evacuation in an educational building using Agent-Based Modeling with emphasis on furnishing location [Volume 7, Issue 1, 2023, Pages 83-90]
  • Godke, Kavitha R Geospatial Analysis and Beneficiation Studies on Iron Ores of Sandur Schist Belt, Dharwar Craton, India [Volume 5, Issue 3, 2021, Pages 495-506]
  • Golmohammadi, M. Experimental Investigation of Steel-concrete-steel Slabs with Stud Bolt Connectors Subjected to Punching Loading [Volume 3, Issue 1, 2019, Pages 93-106]
  • Golroo, A. Validation of Smartphone-Based Pavement Roughness Measures [Volume 1, Issue 2, 2017, Pages 135-144]
  • Golroo, amir Traffic Lane Change Detection using smartphone sensors and GPS [Volume 7, Issue 1, 2023, Pages 13-30]
  • Golroo, Amir Optimal Planning of Pavement Maintenance and Rehabilitation Considering Pavement Deterioration Uncertainty [Volume 5, Issue 3, 2021, Pages 481-494]
  • Goran, Danial A Multi-Period Multi-Objective Routing-Locating of Heterogeneous Vehicles (MPMORLHVP) planning Model for two echelon supply chain with Facility Breakdown [Volume 7, Issue 1, 2023, Pages 31-48]
  • Gorjizade, Ali Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]

H

  • Hadavifar, Mojtaba Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
  • Hadavifar, Mojtaba Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
  • Haddad, Abdolhosein Performance of Bucket Foundation Resting on Sand Subjected To Vertical Load [Volume 3, Issue 2, 2019, Pages 139-148]
  • Hadi, M. A Shear-based Adaptive Pushover Procedure for Moment-resisting Frames [Volume 2, Issue 2, 2018, Pages 183-194]
  • Hadifard, Hojat Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
  • Haghiabi, A. H. Support Vector Machine to predict the discharge coefficient of Sharp crested w-planform weirs [Volume 1, Issue 2, 2017, Pages 195-204]
  • Haghiabi, A.H. Intelligent Modeling of Discharge Coefficient of Lateral Intakes [Volume 2, Issue 1, 2018, Pages 3-10]
  • Haghiabi, AmirHamzeh Intelligent Mathematical Modeling of Discharge Coefficient of Nonlinear Weirs with Triangular Plan [Volume 3, Issue 2, 2019, Pages 149-156]
  • Haghshenas, H. The Evaluation of Friction Demand Factor in Loop Ramps of Interchange Facilities [Volume 2, Issue 2, 2018, Pages 195-208]
  • Hajati Ziabari, Sina The Effect of GGBFS with Steel and Carbon Fibers on the Mechanical Properties and Durability of Concrete [Volume 6, Issue 2, 2022, Pages 319-336]
  • Hajialilue Bonab, Masoud A finite element modeling of drained triaxial test on loose sand using different constitutive models [Volume 6, Issue 3, 2022, Pages 339-358]
  • Hajiani Bouhehrian, Alireza Reinforcement Effects on the Permanent Settlement of Sandy Slopes under Cyclic Loading [Volume 5, Issue 3, 2021, Pages 389-402]
  • Hajibandeh, E. Effect of Nano Rice Husk Ash Against Penetration of Chloride Ions in Mortars [Volume 2, Issue 1, 2018, Pages 97-102]
  • Hajikarimi, Pouria Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
  • Hajkazemi, H. Structural Damage Control with Interval Type-2 Fuzzy Logic Controller [Volume 2, Issue 2, 2018, Pages 125-134]
  • Hamedi, Gh. H. Mechanical Properties of Open Graded Asphalt Mixtures with Pumice Aggregate [Volume 1, Issue 2, 2017, Pages 189-194]
  • Hamedi, Gh.H. Investigating of the Effects of Nano-materials on the Moisture Susceptibility of Asphalt Mixtures Containing Glass Cullets [Volume 3, Issue 1, 2019, Pages 107-118]
  • Hamedi, GH. H. The Laboratory Study of the Effect of Using Liquid Anti-Stripping Materials on Reducing Moisture Damage of HMA [Volume 1, Issue 1, 2017, Pages 23-30]
  • Hasanlourad, M. Effect of Bentonite fine Content on the Triaxial Shear Behavior of Sandy Soils [Volume 2, Issue 2, 2018, Pages 177-182]
  • Hasanpouri Notash, Navid A finite element modeling of drained triaxial test on loose sand using different constitutive models [Volume 6, Issue 3, 2022, Pages 339-358]
  • Hatami, Farzad Innovation Approach for Modelling Compressive Strength of Fiber Reinforced Concrete Using Gene Expression Programming [Volume 4, Issue 1, 2020, Pages 137-142]
  • Hatti, Basavaraj Geospatial Analysis and Beneficiation Studies on Iron Ores of Sandur Schist Belt, Dharwar Craton, India [Volume 5, Issue 3, 2021, Pages 495-506]
  • Hazeghian, Mohammad Three-Dimensional Numerical Study of the Tensile Capacity of Helical Multi-Plates Anchors [Volume 6, Issue 1, 2022, Pages 119-132]
  • Heidari Moghadam, R. An Experimental and Numerical Study on the Effect of Loading Type and Specimen Geometry on Mode-I Fracture Toughness of Rock [Volume 1, Issue 1, 2017, Pages 45-54]
  • Hejazi, M. Optimal Stiffeners Spacing for Intermediate Link in Eccentrically Braced Frame to Increase Energy Dissipation [Volume 1, Issue 1, 2017, Pages 39-44]
  • Hekmati, A. Evaluation of Damage Indicators of Weld and Cyclic Response of Steel Moment Frame Connection Using Side Stiffener Plates [Volume 1, Issue 1, 2017, Pages 67-76]
  • Hemmati, Ali Mechanical Properties of Concrete Containing Polyethylene Terephthalate, Rubber and Glass Wastes [Volume 6, Issue 3, 2022, Pages 387-398]
  • Heravi, G. Cost Overruns and Delay in Municipal Construction Projects in Developing Countries [Volume 1, Issue 1, 2017, Pages 31-38]
  • H. Karimi Maleh, H. Karimi Maleh An Investigation on the Effect of Aggregates Packing Density on the Properties of High-Performance Concrete Mixtures [Volume 1, Issue 2, 2017, Pages 205-214]
  • Hojatkashani, Ata Investigation on the Effect of Addition of Nano Alumina, Nano-silica, Nano Titania, and Mwcnts on Flexural and Compressive Strengths of Cement Mortar [Volume 4, Issue 4, 2020, Pages 487-504]
  • Hosseini, Mir Hamid Seismic Performance Assessment of a Masonry Arch Bridge Using Finite Element Method and Retrofitting by FRP [Volume 6, Issue 1, 2022, Pages 63-82]
  • Hosseini, Seyed Mahmoud Two-Dimensional Geometrically Nonlinear Hyperelastic Wave Propagation Analysis in FG Thick Hollow Cylinders using MLPG Method [Volume 5, Issue 3, 2021, Pages 465-480]
  • Hosseini, S. M. Two Dimensional Stress and Displacement Wave Propagation Under Shock Loading in Saturated Porous Materials with Two Dimensional Functionally Graded Materails Using MLPG Method [Volume 1, Issue 2, 2017, Pages 167-176]
  • Hosseini, S.M. A Geometrically Non-linear Stochastic Analysis of Two-dimensional Structures made of Neo-hookean Hyperelastic Materials Uusing MLPG Method: Considering Uncertainty in Mechanical Properties [Volume 2, Issue 2, 2018, Pages 209-218]
  • Hosseini Nassab, Haddi Evaluation of Protective Cavities Position on Decreasing Destructive Effects of Surface Blast on Buried Tunnels [Volume 4, Issue 4, 2020, Pages 543-556]

I

  • Imam, S M Reza Lateral Stiffness and Bending Moment Changes along Piles Having Different Sections in Loose Sand Subjected to Cyclic Lateral Loading [Volume 5, Issue 4, 2021, Pages 643-656]
  • Imam, S M Reza Numerical Study of the Settlement of Rafts on Soft Soils Improved by Small Groups of Stone Columns [Volume 5, Issue 4, 2021, Pages 577-596]
  • Imani, Meysam Determining Bearing Failure Modes of Jointed Rock Foundations Subjected to the Load of Strip Footings [Volume 3, Issue 2, 2019, Pages 157-166]
  • Imani, Meysam Three-Dimensional Bearing Capacity Analysis of Rock Foundations Subjected to the Loads of Gravity Dams, Case Study: Shafaroud Dam [Volume 5, Issue 2, 2021, Pages 257-268]
  • Imani, Meysam Effect of Load Eccentricity on the Bearing Capacity of Strip Footings on Rock Masses [Volume 6, Issue 3, 2022, Pages 415-432]
  • Izadi, Amir A Multi-Period Multi-Objective Routing-Locating of Heterogeneous Vehicles (MPMORLHVP) planning Model for two echelon supply chain with Facility Breakdown [Volume 7, Issue 1, 2023, Pages 31-48]

J

  • Jaberi, AmirHossein Effect of Shoulder on Safety of Highways in Horizontal Curves Using Vehicle Dynamic Modeling Considering Yaw Rate [Volume 5, Issue 3, 2021, Pages 449-464]
  • Jafari, M.A. Calibration of Safety Factor for Micropile in Transmission Tower Foundations Based on Relative Reliability Approach [Volume 3, Issue 1, 2019, Pages 61-74]
  • Jafarian, Farshid Artificial Neural Network and Optimization Algorithm to Improve Soil Resistance by Means of Aggregation Size Variation [Volume 3, Issue 2, 2019, Pages 179-186]
  • Jafarie Nader, Bahman Effects of Using “NICOFLOK” polymer on the strength of construction and demolition wastes [Volume 7, Issue 1, 2023, Pages 67-82]
  • Jafarzadeh, Firooz Finite difference method for buckling analysis of tapered Timoshenko beam made of functionally graded material [Volume 4, Issue 1, 2020, Pages 91-102]
  • Jahanbakhsh, H. Effects of Silica Fume and Nano-silica on the Engineering Properties of Kaolinite Clay [Volume 2, Issue 2, 2018, Pages 135-142]
  • Jahanbakhsh, Hamid Developing a Novel Machine Learning Method to Predict the Compressive Strength of Fly Ash Concrete in Different Ages [Volume 4, Issue 4, 2020, Pages 423-436]
  • Jalili-Ghazizadeh, Mohammadreza A Proposed Method for Locating of Leaky Areas in Water Supply Networks Based on Flow Hydraulic Grade Line [Volume 4, Issue 4, 2020, Pages 437-448]
  • Jani, Sina A Finite Element Analysis of Slab Opening Effects on the Column Removal Scenarios in Large Buildings [Volume 6, Issue 2, 2022, Pages 263-282]
  • Javadi, Sajad Effect of Shoulder on Safety of Highways in Horizontal Curves Using Vehicle Dynamic Modeling Considering Yaw Rate [Volume 5, Issue 3, 2021, Pages 449-464]
  • Javid, Ahmadreza Three-Dimensional Numerical Study of the Tensile Capacity of Helical Multi-Plates Anchors [Volume 6, Issue 1, 2022, Pages 119-132]
  • Jiryaei Sharahi, Morteza Estimating the Sand Shear Strength from Its Grain Characteristics Using an Artificial Neural Network Model and Multiple Regression Analysis [Volume 5, Issue 3, 2021, Pages 403-420]
  • Jorfi, Seyedeh Soha Investigation Progressive Collapse of K-Model Steel Truss Bridge under Additional Live Load Following Bridge Repairs [Volume 6, Issue 2, 2022, Pages 191-204]

K

  • Kabir, Mohammad Zaman A mathematical model for predicting complete compressive stress-strain curve of plain and short fiber reinforced clay adobes [Volume 5, Issue 1, 2021, Pages 37-68]
  • Kabir, M. Z. Parametric Study on Confined Masonry Walls Subjected to In-plane Cyclic Loading Through Numerical Modeling [Volume 2, Issue 1, 2018, Pages 49-58]
  • Kamalan, H. R. Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) Contamination in Surface Soil along Tehran-Semnan Road, Iran [Volume 1, Issue 1, 2017, Pages 77-86]
  • Kamali, Farhad Free Vibration of Axially Functionally Graded Tapered Micro-Beams Considering Uncertain Properties [Volume 5, Issue 4, 2021, Pages 543-556]
  • Kamarizadeh, E. Evaluation of Seismic Vulnerability of Masonry Buildings without Ties Using the RISK-UE Method, Case Study of Kermanshah City [Volume 2, Issue 2, 2018, Pages 143-152]
  • Kanani, Saeed Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
  • Karami, Farzane An EvolutionaryAlgorithm for Deriving Optimal Operating Policy Under Uncertainties for Tehran Multi-reservoir System [Volume 3, Issue 2, 2019, Pages 213-224]
  • Karamoddin, A. Structural Damage Control with Interval Type-2 Fuzzy Logic Controller [Volume 2, Issue 2, 2018, Pages 125-134]
  • Karimnader-Shalkouhi, S. Evolutionary Polynomial Regression-Based Models to Estimate Stability of Gravity Hunched Back Quay Walls [Volume 2, Issue 1, 2018, Pages 79-86]
  • Karimpour-Fard, M. Evolutionary Polynomial Regression-Based Models to Estimate Stability of Gravity Hunched Back Quay Walls [Volume 2, Issue 1, 2018, Pages 79-86]
  • Karimzad Anzabi, Azin Thermal effects on the mechanical properties of marble, travertine and concrete cores under direct tensile test [Volume 4, Issue 2, 2020, Pages 155-164]
  • Katebi, Ali Competence and affective commitment as mediators of the effect of job characteristics on the performance of Iranian supervising engineers– supervising engineers’ perspective [Volume 6, Issue 4, 2022, Pages 493-508]
  • Kazemi, H. Two Dimensional Stress and Displacement Wave Propagation Under Shock Loading in Saturated Porous Materials with Two Dimensional Functionally Graded Materails Using MLPG Method [Volume 1, Issue 2, 2017, Pages 167-176]
  • Kazemi, Mohammad Sadegh Active control of structures based on an arbitrary damage index distribution [Volume 4, Issue 3, 2020, Pages 385-396]
  • Keivani, Afram BIM-based resource trade-off in dam project scheduling using Atomic Orbital Search (AOS) algorithm [Volume 6, Issue 4, 2022, Pages 469-492]
  • Keramati, Abbas Effect of behavioral parameters of base isolators on the seismic response of the bridge to near-fault ground motions [Volume 4, Issue 3, 2020, Pages 277-288]
  • Keykha, A.H. Behavior of Deficient Steel Members Strengthened Using CFRP Under Combined Compressive Load and Torsional Moment [Volume 2, Issue 1, 2018, Pages 59-68]
  • Khaleghi, M . An Investigation on Biological Treatment of Sandy Soil [Volume 1, Issue 1, 2017, Pages 93-100]
  • Khalili, K. Impact of 30 Years Changing of River Flow on Urmia Lake Basin [Volume 2, Issue 1, 2018, Pages 115-122]
  • Khalili, Mohammad Thermal effects on the mechanical properties of marble, travertine and concrete cores under direct tensile test [Volume 4, Issue 2, 2020, Pages 155-164]
  • Khalilian, Shahrzad Innovation Approach for Modelling Compressive Strength of Fiber Reinforced Concrete Using Gene Expression Programming [Volume 4, Issue 1, 2020, Pages 137-142]
  • Khalilianpoor, A. H. SWOT Analysis on Marine Transport Companies of Iran: a Case Study [Volume 2, Issue 2, 2018, Pages 153-160]
  • Khalili Khasraghi, M. B. The Effect of Alkaline Activator on Workability and Compressive Strength of Alkali-Activated Slag Concrete [Volume 1, Issue 1, 2017, Pages 55-60]
  • Kharazmi, Sara Biological stabilizers for different dispersive clayey soils [Volume 4, Issue 1, 2020, Pages 17-26]
  • Khatami, S.M.H. Effect of Bentonite fine Content on the Triaxial Shear Behavior of Sandy Soils [Volume 2, Issue 2, 2018, Pages 177-182]
  • Khatibi, S.H. Cyclic Behaviour of the Knee Braced System Considering the Type of Knee Joint [Volume 3, Issue 1, 2019, Pages 13-22]
  • Kheyroddin, A. An Overview of the Effects of High-Strength Reinforcement (HSR) on the Intermediate Moment-Resisting Frames [Volume 1, Issue 2, 2017, Pages 177-188]
  • Khodadadi, Larissa A finite element modeling of drained triaxial test on loose sand using different constitutive models [Volume 6, Issue 3, 2022, Pages 339-358]
  • Khodadadi, M. Comparison of Rut Susceptibility Parameters in Modified Bitumen with PPA [Volume 1, Issue 2, 2017, Pages 129-134]
  • Khodadadi, Mojtaba Investigation of the Moisture Susceptibility of Nanocomposite-Modified Asphalt Mixture Using Surface Free Energy Theory [Volume 5, Issue 2, 2021, Pages 287-300]
  • Khodaii, A. Comparison of Rut Susceptibility Parameters in Modified Bitumen with PPA [Volume 1, Issue 2, 2017, Pages 129-134]
  • Khoshand, A. Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) Contamination in Surface Soil along Tehran-Semnan Road, Iran [Volume 1, Issue 1, 2017, Pages 77-86]
  • Khoshand, Afshin Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
  • Kianian, Omid Buckling Analysis of Functionally Graded Plates Based on Two-Variable Refined Plate Theory Using the Bubble Finite Strip Method [Volume 1, Issue 2, 2017, Pages 145-152]
  • Kianibakhsh, Mohammadreza Seismic Performance Assessment of Confined Masonry Buildings Based on Displacement [Volume 5, Issue 2, 2021, Pages 225-244]
  • Kilanehei, F. Comparison of Wind Speed-Up over Escarpments Derived from Numerical Modeling and Wind-Loading Codes [Volume 3, Issue 1, 2019, Pages 75-84]
  • Koohdaragh, Mehdi Output-Error Methods in Structural Modal Identification [Volume 7, Issue 1, 2023, Pages 49-66]
  • Koohestani, Mehdi The nonlinear dynamic analysis of elasto-plastic behaviour of the single-curved FGM shells under impact load [Volume 5, Issue 1, 2021, Pages 17-36]
  • Kouhsari, Hossein Effects of Pozzolans and Nano Bentonite on Properties of Grout [Volume 6, Issue 2, 2022, Pages 283-294]

L

  • Lashteh Neshaei, M.A. Evolutionary Polynomial Regression-Based Models to Estimate Stability of Gravity Hunched Back Quay Walls [Volume 2, Issue 1, 2018, Pages 79-86]
  • Layegh Rafat, mahmood Reliability of Single-Layer Steel Space Domes under the Effects of the Changes in the Height-to-Span Ratio [Volume 6, Issue 1, 2022, Pages 3-14]
  • Layegh Rafat ‎, Mahmood Reliability and Sensitivity Analysis of Single-Layer Space Domes [Volume 4, Issue 3, 2020, Pages 367-376]

M

  • Madani, H. An Investigation on the Effect of Aggregates Packing Density on the Properties of High-Performance Concrete Mixtures [Volume 1, Issue 2, 2017, Pages 205-214]
  • Madhkhan, Morteza Effects of Pozzolans and Nano Bentonite on Properties of Grout [Volume 6, Issue 2, 2022, Pages 283-294]
  • Mahdi Nazar, Mehdi Evaluating the Effect of Liquid Antistrip Additives on Moisture Sensitivity of Glassphalt [Volume 5, Issue 3, 2021, Pages 507-520]
  • Mahjoub, R. Evaluation of Damage Indicators of Weld and Cyclic Response of Steel Moment Frame Connection Using Side Stiffener Plates [Volume 1, Issue 1, 2017, Pages 67-76]
  • Mahmoudzadeh, A. Validation of Smartphone-Based Pavement Roughness Measures [Volume 1, Issue 2, 2017, Pages 135-144]
  • Mahpour, Alireza The effective factors on the safety culture of HAZMAT drivers [Volume 5, Issue 1, 2021, Pages 69-78]
  • Mahpour, Alireza The Assessment of the Change in the Share of Public Transportation by Applying Transportation Demand Management Policies [Volume 5, Issue 2, 2021, Pages 199-212]
  • Mahpour, Amirreza Success Breakdown Structure: Application to Petrochemical Projects Success Assessment [Volume 4, Issue 3, 2020, Pages 333-348]
  • MajediAsl, Mehdi The S-jump’s Characteristics in the Rough Sudden Expanding Stilling Basin [Volume 4, Issue 3, 2020, Pages 349-356]
  • MajediAsl, Mehdi Hydraulic Jump in a Rough Sudden Symmetric Expansion Channel [Volume 5, Issue 2, 2021, Pages 245-256]
  • Maji, Arup Study of the Effect of Sensor Location on Sonic Echo/Impulse Response Testing in Timber Piles [Volume 4, Issue 4, 2020, Pages 473-486]
  • Mamdoohi, Amir Reza An Agent-Based Simulation for Destination Choice of Discretionary Tours: Evidence from Qazvin, Iran [Volume 6, Issue 1, 2022, Pages 51-62]
  • Mardi, Sahand Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
  • Mashmouli Juybari, Reza Evolutionary Polynomial Regression-Based Models for the One-Dimensional Compression of Chamkhaleh Sand Mixed with EPS and Tire Derived Aggregate [Volume 4, Issue 3, 2020, Pages 323-332]
  • Mazaheri, Ahmadreza Artificial Neural Network and Optimization Algorithm to Improve Soil Resistance by Means of Aggregation Size Variation [Volume 3, Issue 2, 2019, Pages 179-186]
  • Mehrgan, Alireza Improvement of Dynamic Behavior of Suspension Footbridges by Modification on Hangers' System Arrangement [Volume 5, Issue 1, 2021, Pages 129-144]
  • Memarpour, M. M. Comparison of Wind Speed-Up over Escarpments Derived from Numerical Modeling and Wind-Loading Codes [Volume 3, Issue 1, 2019, Pages 75-84]
  • Meshkini, Mohammad Bio-Hydrometallurgical Extraction of Nickel from Low-Grade Laterite Nickel Ore [Volume 6, Issue 1, 2022, Pages 105-118]
  • Miralami, Seyedeh Mahdieh The Effect of GGBFS with Steel and Carbon Fibers on the Mechanical Properties and Durability of Concrete [Volume 6, Issue 2, 2022, Pages 319-336]
  • Mirjalili, M.R. Experimental and Analytical Study of new Proposed Semi-rigid Concrete Bam-toColumn Connection [Volume 3, Issue 1, 2019, Pages 49-60]
  • Mirzaee, Reza The S-jump’s Characteristics in the Rough Sudden Expanding Stilling Basin [Volume 4, Issue 3, 2020, Pages 349-356]
  • Mirzaee, Reza Hydraulic Jump in a Rough Sudden Symmetric Expansion Channel [Volume 5, Issue 2, 2021, Pages 245-256]
  • Moasheri, Reza A Proposed Method for Locating of Leaky Areas in Water Supply Networks Based on Flow Hydraulic Grade Line [Volume 4, Issue 4, 2020, Pages 437-448]
  • Mobedi, Ehsan Effects of mechanical coupler on cyclic behavior of wet connection in precast concrete Frame [Volume 4, Issue 1, 2020, Pages 3-16]
  • Moeinaddini, Mazaher Prediction of the Air Quality by Artificial Neural Network Using Instability Indices in the City of Tehran-Iran [Volume 4, Issue 4, 2020, Pages 517-528]
  • Moeini, M. A. The Effect of Bio-Deposition on Mechanical Performance of Cement-Based Materials [Volume 1, Issue 1, 2017, Pages 61-66]
  • Moghadasi, Reza The short-term prediction of traffic parameters: a review of parametric and nonparametric approaches [Volume 6, Issue 3, 2022, Pages 369-386]
  • Moghadas Nejad, F. Comparison of Rut Susceptibility Parameters in Modified Bitumen with PPA [Volume 1, Issue 2, 2017, Pages 129-134]
  • Moghadas Nejad, F. Effects of Silica Fume and Nano-silica on the Engineering Properties of Kaolinite Clay [Volume 2, Issue 2, 2018, Pages 135-142]
  • Moghadas Nejad, Fereidoon Developing a Novel Machine Learning Method to Predict the Compressive Strength of Fly Ash Concrete in Different Ages [Volume 4, Issue 4, 2020, Pages 423-436]
  • Moghadas Nejad, Fereidoon Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
  • Mohammadi, Alireza Investigating the Effect of Particle Size on the Anisotropic Behavior of Saturated Sands, Using Hollow Cylindrical Torsional Shear Apparatus [Volume 4, Issue 4, 2020, Pages 449-472]
  • Mohammadian, M. Cost Overruns and Delay in Municipal Construction Projects in Developing Countries [Volume 1, Issue 1, 2017, Pages 31-38]
  • Mohammadian Amiri, Amir The effective factors on the safety culture of HAZMAT drivers [Volume 5, Issue 1, 2021, Pages 69-78]
  • Mohammadian Amiri, Amir The Assessment of the Change in the Share of Public Transportation by Applying Transportation Demand Management Policies [Volume 5, Issue 2, 2021, Pages 199-212]
  • Mohammadi Golafshani, Emadaldin Innovation Approach for Modelling Compressive Strength of Fiber Reinforced Concrete Using Gene Expression Programming [Volume 4, Issue 1, 2020, Pages 137-142]
  • Mohammadnia, Esmail Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
  • Mohammed, M. H. Shear Behavior of Reactive Powder Concrete Beams with and without Coarse Aggregate [Volume 2, Issue 1, 2018, Pages 87-96]
  • Mohebi, Mohammad Masoud Stabilization of saturated silty sand by colloidal silica: compressive and cyclic strength and shear wave velocity [Volume 4, Issue 1, 2020, Pages 113-124]
  • Mojarad, M. Optimal Stiffeners Spacing for Intermediate Link in Eccentrically Braced Frame to Increase Energy Dissipation [Volume 1, Issue 1, 2017, Pages 39-44]
  • Mokhtari, Maryam Rock fall Susceptibility Mapping Using Artificial Neural Network, Frequency Ratio, and Logistic Regression: A Case Study in Central Iran, Taft County [Volume 4, Issue 1, 2020, Pages 63-80]
  • MollaJafari, Majid Seismic Performance Assessment of a Masonry Arch Bridge Using Finite Element Method and Retrofitting by FRP [Volume 6, Issue 1, 2022, Pages 63-82]
  • Moodi, Faramarz Feasibility of construction of buildings with the 3D printing concrete from different methods perspectives focusing on economic evaluation [Volume 7, Issue 1, 2023, Pages 3-12]
  • Moradi Moqhaddam, Hossein Evaluation of the Effects of Aging and Different Site Conditions on the Seismic Response of Municipal Solid Waste (A Case of Kahrizak Landfill) [Volume 5, Issue 3, 2021, Pages 377-388]
  • Moridi, Ali Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]
  • Morshed, R. Experimental and Analytical Study of new Proposed Semi-rigid Concrete Bam-toColumn Connection [Volume 3, Issue 1, 2019, Pages 49-60]
  • Mortaheb, Mohammad Mehdi Success Breakdown Structure: Application to Petrochemical Projects Success Assessment [Volume 4, Issue 3, 2020, Pages 333-348]
  • Moslemi, Alireza Use of Taguchi Method to Evaluate the Hydraulic Conductivity of Lignocellulosic Fibers-Reinforced Soil [Volume 5, Issue 2, 2021, Pages 213-224]
  • Mousavi, Maryam Estimating the Sand Shear Strength from Its Grain Characteristics Using an Artificial Neural Network Model and Multiple Regression Analysis [Volume 5, Issue 3, 2021, Pages 403-420]
  • Mousavi, Seyed Yasin Use of Taguchi Method to Evaluate the Hydraulic Conductivity of Lignocellulosic Fibers-Reinforced Soil [Volume 5, Issue 2, 2021, Pages 213-224]
  • Mousavi Qieh-Qeshlaghi, P. Theoretical and Experimental Study on Steel Plate Shear Wall with Unequal Columns [Volume 2, Issue 1, 2018, Pages 103-114]
  • Movahedifar, Seyyed Mojtaba Evaluation of Protective Cavities Position on Decreasing Destructive Effects of Surface Blast on Buried Tunnels [Volume 4, Issue 4, 2020, Pages 543-556]

N

  • Nabi Beidhendi, Gholamreza Evaluating the effect of truck size on the amount of Air pollutants emission due to consumption fuel [Volume 4, Issue 2, 2020, Pages 165-174]
  • Nabizadeh, Ali Modified Dynamic Stress Concentration Factor for the Scattering of P-wave by Twin Tunnels [Volume 5, Issue 3, 2021, Pages 433-448]
  • Naderan, Ali Modeling crash frequencies by transportation mode using micro/macro level variables [Volume 5, Issue 1, 2021, Pages 161-170]
  • Naderi, Mahmoud Numerical and Experimental Study of In-Situ Methods to Evaluate the Mechanical Properties of Fiber-Reinforced Mortars [Volume 5, Issue 2, 2021, Pages 269-286]
  • Naderi, Mahmoud “Friction-Transfer” Method to Assess the Compressive and Tensile Strengths and Rupture Modulus of Fiber-Reinforced-Pozzolanic Concrete and Mortar/Steel Adhesion [Volume 5, Issue 4, 2021, Pages 557-576]
  • Naghavi, Fahime Progressive Collapse Evaluation of Steel Structures Considering the Effects of Uncertainties and Catenary Action [Volume 5, Issue 2, 2021, Pages 311-324]
  • Naghizade, A. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
  • Narmashiri, K. Reliability Assessment of CFRP-Strengthened Deficient Steel SHS Columns [Volume 3, Issue 1, 2019, Pages 23-36]
  • Narmashiri, Kambiz Effects of Vertical Deficiency Location on the Structural Behavior of Steel SHS Short Columns [Volume 4, Issue 4, 2020, Pages 399-410]
  • Naseri, Hamed Developing a Novel Machine Learning Method to Predict the Compressive Strength of Fly Ash Concrete in Different Ages [Volume 4, Issue 4, 2020, Pages 423-436]
  • Naseri-Dehkordi, A. Modal Non-linear Static Analysis of Structures Based on Story Shears [Volume 3, Issue 1, 2019, Pages 119-128]
  • Nasiri, Mostafa Delay Sensitivity of Smith Predictor for Real-Time Hybrid Simulation [Volume 5, Issue 4, 2021, Pages 597-612]
  • Nasrollahzadeh, Kourosh Numerical Evaluation of Unreinforced Masonry Brick Walls Retrofitted by Polypropylene Straps Subjected to Lateral Loading [Volume 6, Issue 4, 2022, Pages 447-460]
  • Nazeri Tahroudi, M. Impact of 30 Years Changing of River Flow on Urmia Lake Basin [Volume 2, Issue 1, 2018, Pages 115-122]
  • Negahdar, Hassan Modified Dynamic Stress Concentration Factor for the Scattering of P-wave by Twin Tunnels [Volume 5, Issue 3, 2021, Pages 433-448]
  • Ng, tang-tat Study of the Effect of Sensor Location on Sonic Echo/Impulse Response Testing in Timber Piles [Volume 4, Issue 4, 2020, Pages 473-486]
  • Nikravan, Morteza Evaluation of Sustainability Performance of Cementitious Mortars Containing Silica Fume [Volume 6, Issue 2, 2022, Pages 175-190]
  • Norouzifar, M. N. An Investigation on the Effect of Aggregates Packing Density on the Properties of High-Performance Concrete Mixtures [Volume 1, Issue 2, 2017, Pages 205-214]
  • Nouri, Gholamreza Seismic performance of bridges to a spatially varying horizontal and vertical earthquake ground motion [Volume 4, Issue 1, 2020, Pages 27-36]
  • Nouri, Gholam Reza Effect of behavioral parameters of base isolators on the seismic response of the bridge to near-fault ground motions [Volume 4, Issue 3, 2020, Pages 277-288]
  • Nouri, G. R. Effect of Rotational Components of Strong Ground Motions on the Response of Cooling Towers Based on Dense Array Data (A Case Study: Kazeron Cooling Tower) [Volume 1, Issue 1, 2017, Pages 87-92]
  • Nozari, Mohammad Amin Stabilization of saturated silty sand by colloidal silica: compressive and cyclic strength and shear wave velocity [Volume 4, Issue 1, 2020, Pages 113-124]

P

  • Palthur, Sharath Kumar Geospatial Analysis and Beneficiation Studies on Iron Ores of Sandur Schist Belt, Dharwar Craton, India [Volume 5, Issue 3, 2021, Pages 495-506]
  • Parastesh, Hossein Effects of mechanical coupler on cyclic behavior of wet connection in precast concrete Frame [Volume 4, Issue 1, 2020, Pages 3-16]
  • Parsaie, A. Support Vector Machine to predict the discharge coefficient of Sharp crested w-planform weirs [Volume 1, Issue 2, 2017, Pages 195-204]
  • Parsaie, Abbas Intelligent Mathematical Modeling of Discharge Coefficient of Nonlinear Weirs with Triangular Plan [Volume 3, Issue 2, 2019, Pages 149-156]
  • Paslar, Nima The Effect of  Dimensional Change of Boundary Elements on the Response Modification Factor of the Steel Plate Shear Wall [Volume 3, Issue 2, 2019, Pages 225-232]
  • Poorarbabi, Ali Conversion Factors between Non-Destructive Tests of Cubic and Cylindrical Concrete Specimens [Volume 5, Issue 1, 2021, Pages 3-16]
  • Pourgholi, Mehran Output-Error Methods in Structural Modal Identification [Volume 7, Issue 1, 2023, Pages 49-66]

Q

  • Qolizadeh, Amir Hossein A Finite Element Analysis of Slab Opening Effects on the Column Removal Scenarios in Large Buildings [Volume 6, Issue 2, 2022, Pages 263-282]

R

  • Rabiefar, Amir Modified Dynamic Stress Concentration Factor for the Scattering of P-wave by Twin Tunnels [Volume 5, Issue 3, 2021, Pages 433-448]
  • Radmanesh, F. Meteorological Drought Monitoring Using the Multivariate Index of SPEI (Case Study: Karun Basin) [Volume 3, Issue 1, 2019, Pages 85-92]
  • Raftari, M. Evaluation of Damage Indicators of Weld and Cyclic Response of Steel Moment Frame Connection Using Side Stiffener Plates [Volume 1, Issue 1, 2017, Pages 67-76]
  • Rahai, A. R. The Performance of Integral and Semi-integral Pre-tensioned Concrete Bridges Under Seismic Loads in Comparison with Conventional Bridges [Volume 2, Issue 2, 2018, Pages 219-226]
  • Rahemi, Mohammad Amir A Two-Stage Procedure for Optimum Design of Plate Girders Using a Meta-heuristic Algorithm [Volume 6, Issue 4, 2022, Pages 435-446]
  • Rahimi, Kian Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
  • Rahmati, Mahdi Causes of Delays in Iranian Building Construction Projects [Volume 5, Issue 4, 2021, Pages 613-624]
  • Rajabi, Mohammad Sadra Lost Vibration Test Data Recovery Using Convolutional Neural Network: A Case Study [Volume 5, Issue 4, 2021, Pages 701-714]
  • Rakhshani Moghadam, Marziyeh A Data Mining Framework to Identify Important Factors of Fatigue and Drowsiness Accidents [Volume 5, Issue 3, 2021, Pages 421-432]
  • Ramezani, Yousef Assessment of Data-driven Models in Downscaling of the Daily Temperature in Birjand Synoptic Station [Volume 3, Issue 2, 2019, Pages 193-200]
  • Ramezanianpour, A. A. The Effect of Bio-Deposition on Mechanical Performance of Cement-Based Materials [Volume 1, Issue 1, 2017, Pages 61-66]
  • Ramezanianpour, A.A. Effect of Combined Sulfate-Chloride Attack on Concrete Durability-A Review [Volume 1, Issue 2, 2017, Pages 103-110]
  • Ramezanianpour, A.A. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
  • Ramezanianpour, Ali Akbar Effect of using Calcined Clays, Silica Fume, and Limestone Powder on the Compressive Strength and Chloride Binding Capacity of Cementitious Pastes [Volume 5, Issue 4, 2021, Pages 675-684]
  • Ramezanianpour, A.M. Mechanical and rheological properties of self-compacting concrete containing slag and natural zeolite [Volume 4, Issue 1, 2020, Pages 81-90]
  • Ramezanianpour, AmirMohammad Effect of Micro Silica and Slag on the Durability Properties of Mortars against Accelerated Carbonation and Chloride Ions Attack [Volume 4, Issue 4, 2020, Pages 411-422]
  • Ramezanianpour, AmirMohammad Evaluation of Sustainability Performance of Cementitious Mortars Containing Silica Fume [Volume 6, Issue 2, 2022, Pages 175-190]
  • Ramezanian pour, A.A. Chromate Ion Transfer Through Mortar by Accelerated Migration Method [Volume 3, Issue 1, 2019, Pages 3-12]
  • Ramezanianpour1, A. A. Effect of Nano Rice Husk Ash Against Penetration of Chloride Ions in Mortars [Volume 2, Issue 1, 2018, Pages 97-102]
  • Ranjbaran, Fariman Seismic Performance Assessment of Confined Masonry Buildings Based on Displacement [Volume 5, Issue 2, 2021, Pages 225-244]
  • Raoof, Mohammad Amin Causes of Delays in Iranian Building Construction Projects [Volume 5, Issue 4, 2021, Pages 613-624]
  • Rasaizadi, Arash Traffic Level of Service Prediction by Support Vector Machine, Deep Neural Network and Long Short-Term Memory Models [Volume 5, Issue 4, 2021, Pages 715-726]
  • Rasaizadi, Arash The short-term prediction of traffic parameters: a review of parametric and nonparametric approaches [Volume 6, Issue 3, 2022, Pages 369-386]
  • Rashidi Gouya, Hosein Probabilistic Seismic Hazard Assessment and Geotechnical Seismic Micro-zonation of Kangavar with Ambient Vibration and Electrical Resistivity Analysis [Volume 2, Issue 1, 2018, Pages 29-38]
  • Rashidyan, Saman Study of the Effect of Sensor Location on Sonic Echo/Impulse Response Testing in Timber Piles [Volume 4, Issue 4, 2020, Pages 473-486]
  • Rassafi, Amir Abbas Investigating the effect of road characteristics on fatal crash count and crash severity; Case study: Birjand-Qayen route [Volume 4, Issue 2, 2020, Pages 221-228]
  • Rasti, Mehdi Traffic Lane Change Detection using smartphone sensors and GPS [Volume 7, Issue 1, 2023, Pages 13-30]
  • Rezaee Azariani, H. Exterior Concrete Beam-column Connection Reinforced with Glass Fiber Reinforced Polymers (GFRP) bars under Cyclic Loading [Volume 2, Issue 2, 2018, Pages 161-176]
  • Rezaie Moghaddam, farzad Effects of Using “NICOFLOK” polymer on the strength of construction and demolition wastes [Volume 7, Issue 1, 2023, Pages 67-82]
  • Rezaie Soufi, Ghazal Evolutionary Polynomial Regression-Based Models for the One-Dimensional Compression of Chamkhaleh Sand Mixed with EPS and Tire Derived Aggregate [Volume 4, Issue 3, 2020, Pages 323-332]
  • Riahi Dehkordi, E. Effect of Combined Sulfate-Chloride Attack on Concrete Durability-A Review [Volume 1, Issue 2, 2017, Pages 103-110]
  • Riahi Dehkordi, E. SWOT Analysis on Marine Transport Companies of Iran: a Case Study [Volume 2, Issue 2, 2018, Pages 153-160]
  • Riahi Dehkordi, Erfan Simulation of evacuation in an educational building using Agent-Based Modeling with emphasis on furnishing location [Volume 7, Issue 1, 2023, Pages 83-90]
  • Rojhani, Mahdi Causes of Delays in Iranian Building Construction Projects [Volume 5, Issue 4, 2021, Pages 613-624]
  • Rostami, Ghodsieh Evaluation of heavy metal contamination and associated health risk assessment in water body of the Jajrood River, Iran [Volume 4, Issue 2, 2020, Pages 209-220]
  • Rostami, J. An Investigation on the Effect of Aggregates Packing Density on the Properties of High-Performance Concrete Mixtures [Volume 1, Issue 2, 2017, Pages 205-214]
  • Rowshanzamir, M . A. An Investigation on Biological Treatment of Sandy Soil [Volume 1, Issue 1, 2017, Pages 93-100]

S

  • Saadatfar, S. Evaluation of Underwater Blast on Concrete Gravity Dams Using Three-Dimensional Finite-Element Model [Volume 2, Issue 1, 2018, Pages 69-78]
  • Saberi Varzaneh, Ali Numerical and Experimental Study of In-Situ Methods to Evaluate the Mechanical Properties of Fiber-Reinforced Mortars [Volume 5, Issue 2, 2021, Pages 269-286]
  • Saberi Varzaneh, Ali “Friction-Transfer” Method to Assess the Compressive and Tensile Strengths and Rupture Modulus of Fiber-Reinforced-Pozzolanic Concrete and Mortar/Steel Adhesion [Volume 5, Issue 4, 2021, Pages 557-576]
  • Sabouri-Ghomi, S. Theoretical and Experimental Study on Steel Plate Shear Wall with Unequal Columns [Volume 2, Issue 1, 2018, Pages 103-114]
  • Sadeghfam, Sina Numerical Modeling of Hydraulic Properties of Sloped Broad Crested Weir [Volume 4, Issue 2, 2020, Pages 229-240]
  • Sadrmomtazi, A. Effect of Fiber on Mechanical Properties and Toughness of Self-Compacting Concrete Exposed to High Temperatures [Volume 1, Issue 2, 2017, Pages 153-166]
  • Saeidipour, M. Meteorological Drought Monitoring Using the Multivariate Index of SPEI (Case Study: Karun Basin) [Volume 3, Issue 1, 2019, Pages 85-92]
  • Saharimoghim, Hamid Effect of Shoulder on Safety of Highways in Horizontal Curves Using Vehicle Dynamic Modeling Considering Yaw Rate [Volume 5, Issue 3, 2021, Pages 449-464]
  • Salehi, Ehsan Analysis of Competition between Maritime and Multimodal Land-Sea Shipping in an International Freight Transportation Market [Volume 6, Issue 1, 2022, Pages 83-104]
  • Salehi, Hasan Response Surface Methodology Modelling to Study the Influence of Recycled Aggregates on Some Mechanical Properties of Recycled Concrete [Volume 5, Issue 2, 2021, Pages 301-310]
  • Samadi, Bahram Dynamic Analysis of Suspension Footbridges under Human-induced Vibrations and Near-field Earthquakes–Soti Ghat Bridge in Nepal [Volume 4, Issue 4, 2020, Pages 505-516]
  • Samimi, Kianoosh The durability of Self-Consolidating Concrete Containing Steel Fiber and Two Different Types of Aggregates under the Uniaxial Compression Loading [Volume 6, Issue 2, 2022, Pages 221-240]
  • Saniee Abadeh, Mohammad Traffic Level of Service Prediction by Support Vector Machine, Deep Neural Network and Long Short-Term Memory Models [Volume 5, Issue 4, 2021, Pages 715-726]
  • Sarrafi, A. Chromate Ion Transfer Through Mortar by Accelerated Migration Method [Volume 3, Issue 1, 2019, Pages 3-12]
  • Sarrami-Foroushani, Saeid Buckling Analysis of Functionally Graded Plates Based on Two-Variable Refined Plate Theory Using the Bubble Finite Strip Method [Volume 1, Issue 2, 2017, Pages 145-152]
  • SatariFard, Ahmad Reza Experimental Study of Effects of Fly Ash On the Mechanical Properties of Hybrid Fiber Reinforced Cementitious Composite [Volume 4, Issue 2, 2020, Pages 185-198]
  • Sayyad, Amin Analysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
  • Sebt, M. H. SWOT Analysis on Marine Transport Companies of Iran: a Case Study [Volume 2, Issue 2, 2018, Pages 153-160]
  • Semnarshad, Sina Development of a Pavement Overall Deterioration Index (Case Study: Iran) [Volume 5, Issue 3, 2021, Pages 359-376]
  • Sepehri, M. A Framework for Project Safety Management by Applying Social Network Analysis [Volume 1, Issue 2, 2017, Pages 111-120]
  • Seyedabrishami, Seyedehsan Traffic Level of Service Prediction by Support Vector Machine, Deep Neural Network and Long Short-Term Memory Models [Volume 5, Issue 4, 2021, Pages 715-726]
  • Shabakhty, Naser Reliability and Sensitivity Analysis of Single-Layer Space Domes [Volume 4, Issue 3, 2020, Pages 367-376]
  • Shabani Ammari, Amin Effects of Vertical Deficiency Location on the Structural Behavior of Steel SHS Short Columns [Volume 4, Issue 4, 2020, Pages 399-410]
  • Shabanzadeh, Hamid Improving Behavioral Properties of Dispersive Clay by Addition of Incinerated Sewage Sludge Ash and Hydrated Lime [Volume 5, Issue 1, 2021, Pages 183-196]
  • Shafaati, Mostafa Investigating the influential factors in changing the likelihood of involving pedestrians in dangerous situations [Volume 4, Issue 3, 2020, Pages 357-366]
  • Shafaati, Mostafa The effective factors on the safety culture of HAZMAT drivers [Volume 5, Issue 1, 2021, Pages 69-78]
  • Shafaei, Jalil Proposing Formula-Based Design Method for RC Columns and Uniformly Reinforced Shear Walls [Volume 4, Issue 2, 2020, Pages 249-264]
  • Shafaei, Jalil Direct Design Method for RC Columns and Uniformly Reinforced Shear Walls based on Canadian Standards [Volume 6, Issue 2, 2022, Pages 159-174]
  • Shahabian, F. Two Dimensional Stress and Displacement Wave Propagation Under Shock Loading in Saturated Porous Materials with Two Dimensional Functionally Graded Materails Using MLPG Method [Volume 1, Issue 2, 2017, Pages 167-176]
  • Shahabian, F. A Geometrically Non-linear Stochastic Analysis of Two-dimensional Structures made of Neo-hookean Hyperelastic Materials Uusing MLPG Method: Considering Uncertainty in Mechanical Properties [Volume 2, Issue 2, 2018, Pages 209-218]
  • Shahabian, Farzad Free Vibration of Axially Functionally Graded Tapered Micro-Beams Considering Uncertain Properties [Volume 5, Issue 4, 2021, Pages 543-556]
  • Shahbaz, Mohammad Thermal strength of the alkali-activated slag concrete [Volume 4, Issue 3, 2020, Pages 303-314]
  • Shahbazi, Ali Evaluation and Comparison of High Spatial Resolution Gridded Precipitation by TRMM, ERA5, and PERSIANN-CCS Datasets on the Upstream of the Maroon Basin, Iran [Volume 4, Issue 4, 2020, Pages 529-542]
  • Shahidi, A. Performance Assessment of Grasshopper Optimization Algorithm for Optimizing Coefficients of Sediment Rating Curve [Volume 2, Issue 1, 2018, Pages 39-48]
  • Shahraki, M. Reliability Assessment of CFRP-Strengthened Deficient Steel SHS Columns [Volume 3, Issue 1, 2019, Pages 23-36]
  • Shahraki, Mojtaba The nonlinear dynamic analysis of elasto-plastic behaviour of the single-curved FGM shells under impact load [Volume 5, Issue 1, 2021, Pages 17-36]
  • Shahrouzi, Mohsen Seismic performance of bridges to a spatially varying horizontal and vertical earthquake ground motion [Volume 4, Issue 1, 2020, Pages 27-36]
  • Shakarami, B. Parametric Study on Confined Masonry Walls Subjected to In-plane Cyclic Loading Through Numerical Modeling [Volume 2, Issue 1, 2018, Pages 49-58]
  • Shamoradi, S.B. Probabilistic Seismic Hazard Assessment and Geotechnical Seismic Micro-zonation of Kangavar with Ambient Vibration and Electrical Resistivity Analysis [Volume 2, Issue 1, 2018, Pages 29-38]
  • Shamsi, Z. Intelligent Modeling of Discharge Coefficient of Lateral Intakes [Volume 2, Issue 1, 2018, Pages 3-10]
  • Shamsi, Zahra Intelligent Mathematical Modeling of Discharge Coefficient of Nonlinear Weirs with Triangular Plan [Volume 3, Issue 2, 2019, Pages 149-156]
  • Shariatmadar, H. Exterior Concrete Beam-column Connection Reinforced with Glass Fiber Reinforced Polymers (GFRP) bars under Cyclic Loading [Volume 2, Issue 2, 2018, Pages 161-176]
  • Shariat Mohaymany, Afshin Analysis of Travel Time Distribution for Varying Length of Time Interval [Volume 4, Issue 2, 2020, Pages 241-248]
  • Sharifi, Hamed Optimization of Tunnel Reinforcements by Genetic Algorithm with the Aim of Replacing with Fibers [Volume 6, Issue 1, 2022, Pages 35-50]
  • Sharifi Arkami, Abouzar Proposed List of Significant Indicators for Iran Airport Construction Projects [Volume 3, Issue 2, 2019, Pages 201-212]
  • Sharifzadeh, Mostafa Ground Control Methods in High-Stress Ground Conditions in Civil and Mining Tunnels- Case Studies, and Benchmarking [Volume 4, Issue 4, 2020, Pages 557-578]
  • Shayanfar, Mohsen Ali Effect of distance from the sea on reinforced concrete chloride corrosion probability [Volume 4, Issue 2, 2020, Pages 199-208]
  • Shayegh, H.R. Experimental and Analytical Study of new Proposed Semi-rigid Concrete Bam-toColumn Connection [Volume 3, Issue 1, 2019, Pages 49-60]
  • Shid Moosavi, S. S. The Performance of Integral and Semi-integral Pre-tensioned Concrete Bridges Under Seismic Loads in Comparison with Conventional Bridges [Volume 2, Issue 2, 2018, Pages 219-226]
  • Shokoohi, Mohammad Optimal Planning of Pavement Maintenance and Rehabilitation Considering Pavement Deterioration Uncertainty [Volume 5, Issue 3, 2021, Pages 481-494]
  • Shourestani, Abolfazl R Energy-Based Method for Evaluating Cracks and Resistance of Fiber Reinforced Ultra-High Strength Concrete under Impact Loads [Volume 4, Issue 3, 2020, Pages 289-302]
  • Siddiqua, S. Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) Contamination in Surface Soil along Tehran-Semnan Road, Iran [Volume 1, Issue 1, 2017, Pages 77-86]
  • Sistani Nezhad, R. Parametric Study on Confined Masonry Walls Subjected to In-plane Cyclic Loading Through Numerical Modeling [Volume 2, Issue 1, 2018, Pages 49-58]
  • Soleimanian, M. Comparison of Wind Speed-Up over Escarpments Derived from Numerical Modeling and Wind-Loading Codes [Volume 3, Issue 1, 2019, Pages 75-84]
  • Soltani, Navid Modeling crash frequencies by transportation mode using micro/macro level variables [Volume 5, Issue 1, 2021, Pages 161-170]
  • Soltani, Nemat Modeling crash frequencies by transportation mode using micro/macro level variables [Volume 5, Issue 1, 2021, Pages 161-170]
  • Soltani Jigheh, Hossein Physio-mechanical evaluation of Nano-soil as an additive to the sand-bentonite mixture for Tabriz city landfill liner [Volume 6, Issue 3, 2022, Pages 359-368]

T

  • Tabarsa, Alireza Use of Taguchi Method to Evaluate the Hydraulic Conductivity of Lignocellulosic Fibers-Reinforced Soil [Volume 5, Issue 2, 2021, Pages 213-224]
  • Tabiatnejad, B. Assessment of Polycyclic Aromatic Hydrocarbons (PAHs) Contamination in Surface Soil along Tehran-Semnan Road, Iran [Volume 1, Issue 1, 2017, Pages 77-86]
  • Taghavi Parsa, Mohammad Hossein Optimization of Tunnel Reinforcements by Genetic Algorithm with the Aim of Replacing with Fibers [Volume 6, Issue 1, 2022, Pages 35-50]
  • Taghvayi Yazeli, H. The Effect of Alkaline Activator on Workability and Compressive Strength of Alkali-Activated Slag Concrete [Volume 1, Issue 1, 2017, Pages 55-60]
  • Taheri, Amirhossein The short-term prediction of traffic parameters: a review of parametric and nonparametric approaches [Volume 6, Issue 3, 2022, Pages 369-386]
  • Tahmouresi, B. Effect of Fiber on Mechanical Properties and Toughness of Self-Compacting Concrete Exposed to High Temperatures [Volume 1, Issue 2, 2017, Pages 153-166]
  • Tajabadipour, M. Analysis of Local Site Effects on Seismic Ground Response under Various Earthquakes [Volume 2, Issue 2, 2018, Pages 227-240]
  • Tajabadipour, Mehrdad Evaluation of 1-D Seismic Site Response Analysis and Design of Acceleration Spectra for Different Site Conditions [Volume 6, Issue 2, 2022, Pages 241-262]
  • Tajmir Riahi, Hossein A Robust Optimization Model for Improving Reliability of Tuned Mass Damper [Volume 1, Issue 2, 2017, Pages 121-128]
  • Talaei, R. A Combined Model for Landslide Susceptibility, Hazard and Risk Assessment [Volume 2, Issue 1, 2018, Pages 11-28]
  • Tamannaei, M. The Evaluation of Friction Demand Factor in Loop Ramps of Interchange Facilities [Volume 2, Issue 2, 2018, Pages 195-208]
  • Tamannaei, Mohammad A Game-Theoretic Approach for Transportation of Oil Products in a Duopolistic Supply Chain [Volume 5, Issue 1, 2021, Pages 115-128]
  • Tamannaei, Mohammad Analysis of Competition between Maritime and Multimodal Land-Sea Shipping in an International Freight Transportation Market [Volume 6, Issue 1, 2022, Pages 83-104]
  • Tavakoli Kashani, Ali Evaluating the Effects of Countdown Timers on Intersection Safety: A Case Study in Arak, Iran [Volume 4, Issue 3, 2020, Pages 377-385]
  • Tavana Amlashi, Amir Developing three hybrid machine learning algorithms for predicting the mechanical properties of plastic concrete samples with different geometries [Volume 4, Issue 1, 2020, Pages 37-54]
  • Tavassoli, Kayhan Analysis of Competition between Maritime and Multimodal Land-Sea Shipping in an International Freight Transportation Market [Volume 6, Issue 1, 2022, Pages 83-104]
  • Tayarani Yousefabadi, Amir The Assessment of the Change in the Share of Public Transportation by Applying Transportation Demand Management Policies [Volume 5, Issue 2, 2021, Pages 199-212]
  • Tayfur, Gokmen Hydraulic Jump in a Rough Sudden Symmetric Expansion Channel [Volume 5, Issue 2, 2021, Pages 245-256]
  • Teymour-Moghaddam, Sasan Seismic Evaluation of Coupled Shear Walls with Divided Coupling Beams [Volume 5, Issue 2, 2021, Pages 325-338]
  • Torkiyan, Banafsheh Physicochemical characteristics of Sepiolite and Vermiculite clay soils as landfill clay liners [Volume 6, Issue 3, 2022, Pages 399-414]

V

  • Veisi, Hojat Cadmium Removal from aqueous solution by magnetized and polydopamine surface functionalized single-walled carbon nanotubes [Volume 4, Issue 3, 2020, Pages 315-322]
  • Vosoughifar, Hamidreza Modified Dynamic Stress Concentration Factor for the Scattering of P-wave by Twin Tunnels [Volume 5, Issue 3, 2021, Pages 433-448]

Y

  • Yaghoubi, Mohammad Mehdi Investigating the effect of road characteristics on fatal crash count and crash severity; Case study: Birjand-Qayen route [Volume 4, Issue 2, 2020, Pages 221-228]
  • Yasrobi, Shahaboddin Effects of Plasticity and Fine Percentage on the Unstable Behaviors of Clayey Sands [Volume 6, Issue 1, 2022, Pages 15-34]
  • Yassami, mohammad PSOHHO Hybrid Optimization Algorithm for Truss Optimization [Volume 6, Issue 2, 2022, Pages 295-318]
  • Yoosefi Taleghani, Mahdi A New Correlation to Estimate Bearing Capacity of Micropile Groups [Volume 5, Issue 4, 2021, Pages 685-700]
  • Yousefi, Omid Numerical Investigation on Structural Behaviors of Deficient Steel CHS Long Columns Strengthened Using CFRP [Volume 6, Issue 4, 2022, Pages 509-520]

Z

  • Zahmatkesh, A. Evaluation of Underwater Blast on Concrete Gravity Dams Using Three-Dimensional Finite-Element Model [Volume 2, Issue 1, 2018, Pages 69-78]
  • Zahrai, S.Mehdi Cyclic Behavior of Variously Drilled Flange Beam Connected to Box Column [Volume 5, Issue 1, 2021, Pages 79-94]
  • Zamani Ahari, Gholamreza Dynamic Analysis of Suspension Footbridges under Human-induced Vibrations and Near-field Earthquakes–Soti Ghat Bridge in Nepal [Volume 4, Issue 4, 2020, Pages 505-516]
  • Z. BEYDOKHTI, E. Cyclic Behaviour of the Knee Braced System Considering the Type of Knee Joint [Volume 3, Issue 1, 2019, Pages 13-22]
  • Zeighami, Ehsanollah Cyclic Behavior of Variously Drilled Flange Beam Connected to Box Column [Volume 5, Issue 1, 2021, Pages 79-94]
  • Zekavati, A.A. Calibration of Safety Factor for Micropile in Transmission Tower Foundations Based on Relative Reliability Approach [Volume 3, Issue 1, 2019, Pages 61-74]
  • Zeynali, M.J Performance Assessment of Grasshopper Optimization Algorithm for Optimizing Coefficients of Sediment Rating Curve [Volume 2, Issue 1, 2018, Pages 39-48]
  • Zeynali, Mohammad Javad Assessment of Data-driven Models in Downscaling of the Daily Temperature in Birjand Synoptic Station [Volume 3, Issue 2, 2019, Pages 193-200]
  • Ziaie Moayed, Reza Stabilization of saturated silty sand by colloidal silica: compressive and cyclic strength and shear wave velocity [Volume 4, Issue 1, 2020, Pages 113-124]
  • Zolfagharnasab, Arash Effect of using Calcined Clays, Silica Fume, and Limestone Powder on the Compressive Strength and Chloride Binding Capacity of Cementitious Pastes [Volume 5, Issue 4, 2021, Pages 675-684]
  • Zolfagharnasab, Arash Evaluation of Sustainability Performance of Cementitious Mortars Containing Silica Fume [Volume 6, Issue 2, 2022, Pages 175-190]